Hi Have you all assistance disabled from the assistant option menu?
The assistance menu is set to “true to life”
I uninstalled the new version of the FENIX (1.0.6.146) and reinstalled (1.0.3.128) and it is working perfectly. The problem is with the Fenix update not the sim update
I have the latest update with no issue, …hope you find the solution:)
Good morning!
Just thought I’d update the guys that helped me with my post about being unable to land the Fenix.
I splashed the cash and purchased the FSiPanel and spent 3 hours doing 10 landings at 3 airports in all weathers yesterday and wow does this app help you!
Firstly, the ability to repeatedly attempt landings is incredible. The way the software sets up the plane for the approach is mind blowing but the most is important thing it can give any budding airliner pilot is practice.
So, importantly what have I learnt.
-
I was coming in nose down due to 2D view and not letting the plane sit nose up. Thus hitting the tarmac the wrong end first.
-
I was flaring too much. Cannot believe how gentle you have to be on the stick.
-
I wasn’t trusting the plane to do its stuff. I was intervening where I didn’t need to.
-
I was coming in too fast. I am shocked at how slow you have to be.
In short, I need more practice. And I will. But I am now very much looking forward to my first complete flight after a few more hours of landing at Gatwick! 
Thanks again everyone for your input. Much appreciated. 
|16x16]
1 Like
I don’t understand your statement on speed. Once you disconnect the AP at eg minimums, the auto throttle still keeps the required approach speed as it is supposed to do. Or are you also operating thrust manually? And even then the Performance-Approach page in the MCDU shows you the correct approach speed. So there is no guessing about how fast or slow you have to be.
What’s the “Flight Mode” option in the EFB settings for? Thanks!
Have detached and retached your controls in a running systems? Could help to initialize your controls again. Also take a look at your control setup. Sometime the wrong profils are used after an update.
No, something must have been wrong with the downloaded file. I installed it twice with the same results. But then for some reason I decided to redownload the file and instal that one and it is working perfectly now. Must have been some corruption in the download. All resolved now. Thanks
What is going on with Fenix Discord, I can’t access it any more? Is it just me?
Seems normal to me.
1 Like
You have to connect your Fenix account to your discord one.
It was and it worked but seems I got logged out of everything. After reloging everything works as expected
1 Like
Hello I bought a curved monitor with 1440p Resolution and now I can’t click buttons in the Fenix cockpit, cause they activate only If i go slightly to the left or right of them. Is there a solution for this distortion?
Disable or enable lens correction in the sim menu for a start!
aircraft veers hard to the right on takeoff. problem started today. also found speed tape on pfd does not increase as plane speeds up.
I haven’t experienced this, but I’ll be sure to check later. Was an update released?
I also learned to land properly the Fenix with FSIPanel. Now I can even handle heavy cross-wind landings.
Amazing add-on, works flawless with the Fenix!
1 Like
Check if Icing in the sim is set to off. See also other threads.
Can confirm the fenix devs told me the same thing. My icing effect was on, do they want it off?