A320 Neo V2 AP disconnect warning horn wont reset

Sim Update 14 Beta Aircraft & Systems
, ,
1

:wave: Thank you using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.

Are you using Developer Mode or made changes in it?

no

Which aircraft are you using that experiences this issue?

A320 Neo v2

Brief description of the issue:

AP disconnect warning horn wont reset

Provide Screenshot(s)/video(s) of the issue encountered:

Detailed steps to reproduce the issue encountered:

Fly the aircraft in autopilot and try to disengage

PC specs and peripheral set up:

Are you using DX11 or DX12?

Dx12

Are you using DLSS?

no

:loudspeaker: For anyone who wants to contribute to this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

Are you using DX11 or DX12?

Are you using DLSS?

If relevant, provide additional screenshots/video:

2

This is the actual case in the real Airbus A320.

You can silence the horn buy clicking on the Master Warn Shutoff button that illuminates red, and then by hounding to the center console and clicking the“CLEAR” button near the two center screens.

3

Well, that works, but not the standard way of doing it.

Afaik, when the ap is disconnected by the pilot by pressing the sidestick red button, it starts blaring but for 3 seconds, then it should be sinlenced automatically. The red button can be pressed immediately again to cancel the warning.

The continuous “cavalry charge” happens when autopilot is disconnected because of some non normal scenereo (flight computers, manual stick input etc), in that case I am not entirely sure what happens irl, that is if pressing the red button on side stick should cancel the warning or not.

2 Likes
4

Do you have the same issue if you follow the OP’s steps to reproduce it?

Yes. But only on final when the ILS was estabished.

Provide extra information to complete the original description of the issue:

During cruise I disconected the AP accidentaly by manual input the flystick, and ony the 3 beeps sound. The constant warning only occurs on final approach/landing

Are you using DX11 or DX12?

XBOX

Are you using DLSS?

If relevant, provide additional screenshots/video:

1 Like
5

I had the exact same issue im on Xbox X as well

6

You can bind a “Disconnect AP” button/key, and press that button/key twice.
I bind the red button on my Thrustmaster TCA Airbus Sidestick, and it works fine. The default binding for that button is “Toggle AP”, which by pressing second time will re-engage the AP.

7

I trying to post and report a bug can someone report this one while changing to another runway and playing around with the arrival mid flight the entire aircraft panels froze. For some reaons I am not able to create a topic. https://youtu.be/ZwOat3GFw7E?t=6614 here is the link of the where the bug occoured.