Hello Neo4316 - Happy Christmas,
I really appreciate your input to get me up and running BUT… still the same.
The only setting I needed to change was to Modern.
- I spawned to the gate with 9460kg of fuel on board.
- Selected Battery 1 & 2 ON.
- External power ON
- Aligned IR’s taking 7 mins. ( I know how to change time for quicker alignment)
5 All #2 boots pumps will not switch ON. #1 pumps ON
6.APU master switch ON followed by APU start ( both blue)
NOTE: The APU never starts unless I press CTRL E. But as soon as I do that BOTH Engine Master switches mover to ON. I turn them both OFF
7.The APU comes online and master switch turns Green.
8. Pressed APU Bleed ON
9. When the APU is fully online with 35psi duct pressure .
I attempt to start #2 engine but by that time the APU decides to shut down.
Again a non starter.
A pity I was hoping it was going to work, but I don’t want to do a full reinstallation unless I can help it. But thinking about it, it is only the A320 giving me this problem so there must be a solution.
Thanks for your help,
Don