I’ll have to take another look.
Yesterday, when I flew it the PA44 the autopilot panel would not turn on.
It would capture altitude and follow heading, but no display to set VS…
I’ll have to take another look.
Yesterday, when I flew it the PA44 the autopilot panel would not turn on.
It would capture altitude and follow heading, but no display to set VS…
The Carenado Mooney, WACO, PA44, C337, and Piper Arrow are variants of the C170, if you have the C170. Essentially, it’s highly likely that all the Carenado aircraft except for the Piper Archer are missing their icao_model information, so, they’re being grouped together under the first Carenado plane you have as they all share the same ui_createdby.
I flew the C170, Mooney, and WACO tonight, and they all work fine as far as I could tell (just short 5 minute flights), except the Mooney seemed to just constantly want to dive. But it was my first night using an Xbox controller, and I didn’t check everything, so, it could have been me.
One more update
Taog Huey - Shows in Menu, Loads in Sim, Does not crash sim, instruments work, will fly, has sound. Problems: window glass is very dark tinted, no pilots visible in external view.
Taog Llama - Shows in Menu, Loads in Sim, Does not Crash Sim, Instruments working, will fly, has sound. Didn’t notice any other issues.
Taog Alouette - Shows in Menu as a variant of the Llama, Loads in Sim, Does not Crash Sim, Instruments working, will fly, has sound. Didn’t notice any other issues.
They were all for very short flights and sadly I forgot to try the EFB/tablet on any of them so I can’t tell you if that works or changed anything like visibility of pilots in the Huey.
Thanks for sharing all that work with us.
It looks like three of my favorites (Wilga, Hjet, DA42) are all working well for you.
That’s good!
Not a/c but all DRZEWIECKI DESIGN sceneries work perfectly.
Is this thread necessary? And if you cannot be completely unbiased, try as you might, it could be a bad idea.
The Hype H-160 is green across the board. I’ve flown it several times. The only issue is escaping to the settings menu while in flight and then resuming. Collective control is impacted causing the heli to shake. Landing first and then escaping and resuming works normally.
Yes, it is necessary. Kindly avert your gaze if you need to.
I have found it hugely helpful. Why use trial-and-error on my own mods when I can reference this list and see that they are/are not working? And therefore skip the ones that have been noted as not working. It saves lots of time.
HPG H145 - all green across the board. All variants (military, rescue, etc) are working correctly.
HPG’s custom rotorwash effects don’t seem to be working, and it doesn’t make use of the FS built-in effects. HPG mission generator doesn’t seem to be working for me via the tablet, but it is in perfect working order in every way otherwise.
InidaFoxtEcho/Heatblur F-14 - all green, everything works. Jester menu is very dim so its hard to see, but is still usable and all the functions on Jester menu appear to be working (changing loadout, quick-start, ground power, etc).
And just to clarify on my last post, Taog Huey does not have sound issues. They appear to be working. The only problems I found are with the window glass being very heavily tinted, and no crew are visible when using any exterior view (so your heli has a ghost pilot).
Two new patches fixed:
Apparently the GAS ‘Model 75 Stearman’ is good in 2024 now, the only glitch being the pilot avatar won’t load : see Dev’s comments :
Likewise the Super Decathlon :
I was flying the PMDG 737 around on XSX with minimal problems, and of course because it worked fairly well they decided to take the liveries away. 777 is no go though.
I just dumped the entirety of the C24 in the 2024 community folder(direct FSW purchase), runs super smooth but had to hot link a ‘take control of player’ button to get in/out of it(with it being a spare mouse button definitely handy finishing a walk around-extra new bonus bind!). Only used the G5/GNS and the two primary G5 displays are very dim, although moving the panel lights knob brightens it up although it switches back after a few seconds to dim-so I know it’s doable. I originally started with the G3/PMS livery and those displays looked fine(albeit with PMS error screen-haven’t tried installing that yet). Engine monitoring gauge is native to the aircraft and worked perfectly.
The native EFB is stuck on one screen and can’t be manipulated, and there’s no visible avatar pilot(can’t even try to click passengers on in the passenger menu).
But darn if it’s not beautiful and smooth and flies and sounds great. Can really tell the difference vs a streamed aircraft as it’s just ‘there’ and perfect with no texture drop-in when switching camera views for a little bit while something is streamed in, particularly for the first time. Just bang! Sierra ready to go.
Could someone tell me why the link to the JP Logistic 152 Fix is not working? I have no experience with Discord.
Probalby you first have to join the JP Logistic discord server. Then the link should work. Here’s an invite to join: WBSim/JP Logistics Discord Server
Thanks a lot