What do you mean by saying to “play around with your settings (brake axis) to get it to o%”?
This is how it looks right now:
And this is how I have my brakes settings:
@Lopezmusikka - I was able to solve this with the suggestion by @OnkelMatze5995. In my setup I’m using a Thrustmaster T.1600. I had bound the control “Brakes” to button 2 - and this had no effect on the Debug Brake Input as depicted in your screenshot - in fact, mine was stuck at 91%. I removed that control binding and instead per @OnkelMatze5995’s suggestion, I set the joystick slider to control both Left Brake Axis and Right Brake Axis…yes, they will show as conflict but it works fine. I also had to click the Gear icon and Set Inverted Axis ON. On a side note, I had the sim paused while doing this and didn’t see any changes in the Debug window…but when I went back live, it worked. Note - I’m also using a Thrustmaster throttle quadrant, so the slider in my 1600 was not being used for anything. Now I’m able to roll, hopefully this helps.
1 Like
Will try.
I am still having this problem, just tried to fly the A320 (fenix) and I push backed, and cannot move, will report back. I do not have rudder pedals so…
He said he did in his post. Did you read it at all?
A possible solution is here. The idea is to unbind brake settings from controllers. Discord
Please publish it here if you are able to. There are a lot of folks, like me, for whom Discord does not work.
Solved by unbinding LEFT (RIGHT) BRAKE AXIS of my TCA Throttle Quadrant (in case you have this hardware). Regarding brakes, I only have one button assigned in my joystick, and keyboard is by default.
Yes of course I did, but you may remove the chocks on the outside but some aircraft require you to do this on the EFB.
This was a good find on your part. I looked at my TCA Throttle Quadrant bindings and found a lot of stuff, including the brakes, that shouldn’t be there. Deleted most all of it. It makes a difference.
yes Thanks I don’t understand why it worked with no issues until few days ago and today I figured out this new issue from A.s.sobo
The slider on the stick I was using as a spoilers. Now I do have to change because of them decided to put left and right brake axis…clowns!!!
Thank you BTW at least now the fake airplanes are moving
Moderator Edit:
Hello, what happens to me is that the plane does move but it almost doesn’t turn on the ground, and that’s with the whole Airbus series
Hola, a mi lo que me pasa es que el avion si se mueve pero casi que no gira en tierra, y eso con toda la serie de airbus
Thanks for the suggestions.
I’ll tell you how I managed to fix the problem:
I just unassigned the pedals from its breaks bindings and replace them with numeric keyboard bindings (number 7 and 9)
Now I use the pedals only for rudder.
I hope Asosbo finds the way to fix it. It just does not make sense to invest in rudder pedals if you cannot use them…
2 Likes
I had the same problem, but I found the Pause button was somehow activated. So I unpaused and continued normally 
. So, try to check Pause button.
Worked for me. Thanks so much for sharing this.
thak, you. it work for me
I unbound all brake related key bindings on all my devices (KB/M, Thrustmaster TCA Throttle quadrant and flight stick). Then I just bound “Brakes” to my chosen input. So far, it seems to have done the trick.
The first solution still kept me in the braking position. The secondary solution worked for me. Left the slider in full position as I don’t use it anyway. Thank you!