All Inibuilds A300s load with the throttle levers in the opposite direction

User Support Hub Aircraft & Systems
, , , ,
1

Using the template below will greatly help the team reproduce the issue and ease the process of fixing it. Before posting, search for an existing report. If you are not sure it’s a bug, please first report in User Support Hub.

3 tags are required - add them in the tag section next to the title above:

Feel free to delete this quote section after adding your appropriate tags.

ISSUE DESCRIPTION

Description of the issue: when I start the flight, in every inibuilds Airbus, one throttle lever is all the to full power and the other is at idle. I have to move both throttles on my quadrant to reset it. After I reset it functions fine…at least on the 320neo. The thrust reverse on the others is a separate issue.

If applicable, which aircraft is experiencing this issue:

[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?

No community items

FREQUENCY OF ISSUE

Every flight

REPRODUCTION STEPS

Please list clear steps you took in order to help our test team reproduce the same issue:

  1. Select free flight
  2. Select any Airbus
  3. Start flight

YOUR SETTINGS

If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.

What peripherals are you using, if relevant: Turtle Beach Yoke and Throttle Quadrant. Turtle Beach Rudder Pedals.

[PC Only] Are you using Developer Mode or have you made any changes to it?

No and no

[PC Only] What GPU (Graphics Card) do you use? RTX 4090

[PC Only] What other relevant PC specs can you share?

64gb ddr5 ram
7950x3D

MEDIA

Please add a screenshot or video of the issue occurring.

[END OF FIRST USER REPORT]

:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?
•

Provide extra information to complete the original description of the issue:
•

If relevant, provide additional screenshots/video:
•

2

Thank you for this report. We’ve moved your topic into the User Support Hub.

The Bug Reporting Hub is for posting suspected or confirmed bugs that other users are able to reproduce without duplicating an existing bug report. Using the template or providing all the relevant information about your bug and sim setup is required in order to provide valuable information, feedback, and replication steps to our test team.

If you are not sure if your issue is a bug or need further input from the community, please use the User Support Hub category.
If the community can replicate your issue, first search the Bug category to see if there’s an existing topic. If it already exists, contribute to that report. Duplicate bug reports will be closed.

If you believe it is a new report and no duplicate exists, then create a new bug topic using the provided topic template.

All issues caused by or involving third-party addons/mods should be reported to the third-party developer. Assure that no addons/mods are used when reporting issues in Bug Reports.

3

Not sure I follow. Its bugged. Doesn’t happen with any other plane in msfs. This isnt a user support issue. Further the inibuilds planes in 2020 are fine.

4

Do you have the same issue if you follow the OP’s steps to reproduce it?
• no

Provide extra information to complete the original description of the issue:
•

  1. Selected free flight flight, started on the runway at KMCO (ms-store, SU1)
  2. Selected Airbus A320 v2
  3. Started flight, both levers are at idle (see screenshot)

Peripheral: Logitech Extreme 3D pro
I would recommend to make a test without your USB devices connected (except keyboard, mouse). If no issue, then reconnect and review the bindings of your Throttle Quadrant

If relevant, provide additional screenshots/video:
•

Screenshot (292)
Screenshot (292)1918×1090 220 KB

5

Bindings are correct.

When flight begins throttles are at idle.

IMG_3847
IMG_38471920×2560 328 KB

When flight begins the airbus throttles in sim are inverted.

Screenshot 2025-02-16 185847
Screenshot 2025-02-16 1858471251×833 118 KB

As soon as I move the physical throttle the airbus throttles set to the correct position.

Screenshot 2025-02-16 185856
Screenshot 2025-02-16 185856761×639 66.4 KB

6

I decided to install the Fenix A320 to try it out and that throttle loads correctly. So it’s definitely not a binding issue. Duel prop planes also load correctly.

7

Found this is also happening with the default 737 and 777. Can we move this back to the bug section?

8

I had a problem like this early on. Ended up being some combination of corrupted bindings and needing to calibrate. Took some fiddling but it works now.

Does it happen if you physically disconnect EVERYTHING except keyboard and mouse? If it still happens make sure nothing in the keyboard / mouse mappings has anything related to engine control mapped. Especially, for engine #1.

This is a symptom of the ridiculous unfriendly control mapping system but I likely not a problem with the planes.

1 Like
9

If it was a spread bug many users would already have reported that issue, I cannot find any similar report.
As commented by @mjchernis and I, have you tested disconnecting your USB peripherals (except mouse/keyboard) ?

Hopefully someone using a throttle quadrant like the turtle-beach could provide some feedback about their throttle configuration/binding.

10

Its a bug. The Fenix airplane loads correctly. Duel props load correctly. Just because Im the first person to report it doesn’t mean its not a bug.

11

I just tested. It happens without the throttles connected. Fenix A320s work fine, duel prop planes work fine.

Its limited to the Airbus planes, 787, and 737.

12

When you have one of the aircraft loaded that gives you this issue, check your bindings and see if the throttle number two has an inverted axis.

1 Like
13

Did you disconnect everything except keyboard and mouse? Or, just the throttles?

There are probably a dozen threads similar to this on these boards. It usually takes some hunting but always seems to end as a bind problem.

The planes you are referencing are very popular. Something like this would be very widely reported if it was a bug vs. a local config issue. Also, unlikely the 787/737 would have the same problem as they are not IniBuilds planes.

Can you capture a video with ALL assigned bindings so we can be more helpful? Folks here are usually faster at fixing config issues than Asobo is at fixing bugs. So, you are better off if this is not a bug.

2 Likes
14

What is the velcro for?

15

Its the soft side of a velcro patch. Finger touch so I can tell what the Im touching with the VR headset on.

1 Like
16

I did. I think Im going to give up on it for a while. The Fenix A320 and IniBuilds A300 work perfectly with the bindings, but the same bindings don’t work on the IniBuilds A330, A321, 787, or 737. Too frustrating compared to 2020.

Single and Duel Prop planes are also working fine.

17

I hear ya. Lots of gremlins for sure.

Happy to try to help if/when you want to take another try at it.

18

I’ve seen this in a few planes. The starting position is just full thrust for some reason, instead of idle. When you wiggle the controls they then sync up with the sim. Other controls do this also, and the only reason you notice in this instance is because of the default position. If you always started the sim with the physical throttles full forward, and brought them back to idle you would never have noticed.

Either way it should be an easy issue to resolve. If you had access to the files you might even be able to do it yourself. The ramp start, and other config files, have settings for various switches depending on where you start your flight i.e. ramp, runway, or in the air.