I don’t think you will need to return it. You can allways calibrate your device inside Windows, outside the device software. Search for your yoke in Control Panel, Devices. Right click on the yoke-image, select the top one, it should be something like Gamecontrolsettings (my system is in Dutch so I don’t know if the translation is correct), select Properties and then you can calibrate. Usualy you do not need to go through all of this. My Saitec also pulls to the right, dispite autorudder turned on. It occurred since I disassembled the device to remove the nasty elevator detend. If you, before every flight, move the yoke axis to full left, full right and full forward and full backwards, the yoke autocalibrates and centers nicely. I hope this helps.
1 Like