impossible to fly the cessna caravan. about 10nm from runway ATC keep saying move up to 16,000 , after i change the altitude ATC keep saying descend to 2000, then change and ask to descend to 2900.
when about to land , airplane goes bersek on the right or the left by itself…just
before landing.
many times i tried to fly the cessna caravan and its almost impossible and especeially when the ATC goes wrong. i dont have any problems with other aircrafts.
The altitude changes are an ATC problem, not unique to the caravan. I’ve had them assign an altitude to me in a 172 that it couldn’t even get to.
I fly the caravan a lot (more than 60 hand-flown landings) and have never had the issue with the plane going crazy at landing. I’m not sure what to check…maybe check flight model (I use modern), weather, autopilot making the landing, AI control??? I’ll keep looking at possibilities to see if I can recreate the issue.
Regards
I don’t think the 2 issues you’ve raised are in any way related. The ATC is awful and I’d recommend you cancel IFR when their requests get a bit unreasonable. Then after lining up with the runway, make contact with the tower to request a straight-in landing.
when about to land , airplane goes bersek on the right or the left by itself…just
before landing.
It’s strange, because I’ve experienced something similar on the Baron G58 about a week ago. About 20 feet from touchdown there’s a violent left/right motion, almost as if the pilot has slammed the rudder either way. I did the same landing 5-6 times in that same session, and got the same reaction every time…
But I’ve not been able to recreate this in all the landings I’ve done since, so I believe it may just be yet another random bug with the sim. You should try this flight again (with the same weather if possible) and see if you get the same reaction. For the record, I don’t think its the plane.
ive tested it many times and as soon im about 20 to 30 feet…slammm on right or left.
atc telling me to increase to 16,000 or 10,000 about 3 miles from landing.
ive checked evrything in my computer, yoke and rudder and evrything is perfect.
and this happen with other planes to. so the problem…MSFS2020