ISSUE DESCRIPTION
As I’m starting to bind more and more functions to my peripherals, I am finding more and more and more “issues” with the control bindings. This instance it has to do mapping for landing lights and taxi lights.
When i map a switch to the “Landing lights off/on”, It will in fact operate a set of lights under the nose of the Bell 407. But I noticed finally that while toggling the switch (bound to “Landing lights off/on”), it is physically switching the Taxi light switch indicated by the Red arrow in the provided photo.
It does in fact technically turn a set of lights off and on but is switching the taxi light switch not the landing switch that it was bound to.
However, when i map a switch to the “Taxi Lights off/on”, it tries to operate the landing light 3 way switch indicated by the green arrow in the photo. This landing light switch in the photo has OFF, FWD, AND BOTH. If I use my mouse to work this switch it works fine, but
-
the bind that is controlling it, is the taxi light bind AND
-
they will not function by a switch or button or anything other than the mouse.
I am also having other lights like the cabin lights and panel lights not physically functioning after keybinding but again work just fine if you use the mouse. No matter how many different ways or settings you tweak they just wont work and is VERRRYYYY frustrating.
There are so many other bindings that are just not working, no description, even duplicates with slightly different names or are cris crossed as mentioned above. Just a super hot mess.
If applicable, which aircraft is experiencing this issue:
Currently the Bell 407
[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
None installed
FREQUENCY OF ISSUE
How often does this occur for you
Any time you open the exe. bugs everywhere oh my…
REPRODUCTION STEPS
- load up the bell 407
- bind the “Landing Lights Off/On”
- Look in freelook at your collective at the light switches and see which one moves and operates. And good luck getting the actual 3 position landing light to work other than with a mouse.
What peripherals are you using, if relevant:
Flight Stick: VKB Gladiator NXT EVO Premium
Throttle: VKB STECS Throttle STD
Collective: Virpil VPC Rotor TCS Plus Base with the Hawk 60 Grip
Rudder Pedals: Logitech Flight Rudder Pedals
[PC Only] Are you using Developer Mode or have you made any changes to it?
NO
[PC Only] What GPU (Graphics Card) do you use?
EVGA GeForce RTX 3070 Ti 8 GB FTW3 ULTRA GAMING Video Card
[PC Only] What other relevant PC specs can you share?
Win 11pro
Intel 12th gen 12700k cpu overclocked to 4.9Ghz
Asus TUF GAMING Z690-PLUS WIFI ATX LGA1700 Motherboard with ddr5
G.Skill Trident Z5 64 GB (2 x 32 GB) DDR5-6000 CL36 Memory
Several Samsung M.2-2280 NVME Solid State Drives
EVGA GeForce RTX 3070 Ti 8 GB FTW3 ULTRA GAMING Video Card
EVGA 850 psu
MEDIA
[END OF FIRST USER REPORT]
For anyone who wants to contribute on this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
•
Provide extra information to complete the original description of the issue:
•
If relevant, provide additional screenshots/video:
•