Have you disabled/removed all your mods and addons? If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.
No
Which aircraft are you reporting an issue about? (Please also add the proper tag for it)
CL-415
Which aircraft version are you experiencing this issue on? (You can find this listed in the Content Manager under the Aircraft Name)
1.0.4
Brief description of the issue:
Electrical bus indications do not make sense. MAIN 1 bus “OFF” light appears with the generator connected and can not be extinguished except by turning off GEN 1, does not seem to respect the setting of the bus ties. Bus volts do not seem to correspond correctly to the state of the generators and bus ties. Amp loads on generators are extremely low, amp loads on batteries are extremely high (-340 showing on each battery with normal load regardless of generator state).
Provide Screenshot(s)/video(s) of the issue encountered:
Detailed steps to reproduce the issue encountered:
- Load the CL-415 from a ramp start. Check volt/amp indications with batteries and ground power. 2. Start both engines. Check volt/amp indications during start and after each engine start. 3. Operate generator switches on and off, bus ties on and off, while checking volt and amp indications of batteries and main busses and the state of the MAIN 1 and MAIN 2 lights.
PC specs and/or peripheral set up if relevant:
N/A
Build Version # when you first started experiencing this issue:
1.37.19.0
For anyone who wants to contribute on this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
Provide extra information to complete the original description of the issue:
If relevant, provide additional screenshots/video: