ISSUE DESCRIPTION
Description of the issue:
Front Wheel & Strut Inspections cannot be conducted in the Cap-4 Paulistinha
If applicable, which aircraft is experiencing this issue:
Cap-4 Paulistinha
[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
No 3rd-Party or Community Addons (default installation) / Yes
FREQUENCY OF ISSUE
How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Every time (Twice so far).
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue:
- In Free-Flight, start cold-n-dark at a parking spot - e.g. #24 at Santos Dumont (SBRJ)
- Visually inspect the front wheels & struts. The usual text is not displayed, and the inspection does not result in a green checkmark (or anything else).
Note: the tailwheel, ailerons & right elevator inspections are OK (left elevator inspection pin is missing - bugged separately).
See screenshots below.
YOUR SETTINGS
What peripherals are you using, if relevant:
N/A
[PC Only] Are you using Developer Mode or have you made any changes to it?
Developer Mode is Off / No changes
[PC, MSFS 2020 Only] Are you using DX11 or DX12?
N/A
[PC Only] What GPU (Graphics Card) do you use?
Intel Arc 770 (16GB, v32.0.101.6314)
[PC Only] What other relevant PC specs can you share?
Build: v1.3.23.0
Hardware: i7-12700K, 32 GB 5200 MHz DDR5 CL40
MSFS Version: MS-Store, Premium Deluxe
Graphics Tab: Display: Full Screen; HDR10: On; Full Screen Res: 3840 x 2160; AA: TAA; Render scaling: 65 (Resolution: 2496 x 1404); AMD FidelityFX: 150; VSync: Off; FRL: N/A; Dynamic FRT: Off; TLOD: 400; OST Pre-Cache: Ultra; Disp. Map: On; Buildings, Rocks: High; Trees, Plants, Grass: Medium; OLD: 200; V. Clouds: Ultra; Texture Res: Medium; AF: 4x; Water: Medium; RayTracing: On; SM: 2048; TS: 512; CS: High; WE: Medium, AO: High; CR: 256; RR: Medium; LS: High; DoF, MB: Off, GCRR: High; CQ, TAQ, AT, RT, ST: Medium, Fauna: Off.
MEDIA
Missing text - both wheels & struts exhibit this:
Inspection not possible to complete on both front wheels and struts:
[END OF FIRST USER REPORT]
For anyone who wants to contribute on this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
•
Provide extra information to complete the original description of the issue:
•
If relevant, provide additional screenshots/video:
•