Cap-4: Left Elevator Inspection Missing

ISSUE DESCRIPTION

Description of the issue:
The left elevator inspection is missing in the Cap-4 Paulistinha.

If applicable, which aircraft is experiencing this issue:
Cap-4 Paulistinha.

[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
No 3rd-Party or Community Addons (default installation) / Yes

FREQUENCY OF ISSUE

How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Every time (Twice so far).

REPRODUCTION STEPS

Please list clear steps you took in order to help our test team reproduce the same issue:

  1. In Free-Flight, start cold-n-dark at a parking spot - e.g. #24 at Santos Dumont (SBRJ)
  2. Try to visually inspect the left Elevator. This cannot be done, as the “inspection pin” is missing.
    In the screenshot below, note the right elevator pin is present & can be inspected, as can the rudder & tailwheel.

YOUR SETTINGS

What peripherals are you using, if relevant:
N/A

[PC Only] Are you using Developer Mode or have you made any changes to it?
Developer Mode is Off / No changes

[PC, MSFS 2020 Only] Are you using DX11 or DX12?
N/A

[PC Only] What GPU (Graphics Card) do you use?
Intel Arc 770 (16GB, v32.0.101.6314)

[PC Only] What other relevant PC specs can you share?
Build: v1.3.23.0
Hardware: i7-12700K, 32 GB 5200 MHz DDR5 CL40
MSFS Version: MS-Store, Premium Deluxe
Graphics Tab: Display: Full Screen; HDR10: On; Full Screen Res: 3840 x 2160; AA: TAA; Render scaling: 65 (Resolution: 2496 x 1404); AMD FidelityFX: 150; VSync: Off; FRL: N/A; Dynamic FRT: Off; TLOD: 400; OST Pre-Cache: Ultra; Disp. Map: On; Buildings, Rocks: High; Trees, Plants, Grass: Medium; OLD: 200; V. Clouds: Ultra; Texture Res: Medium; AF: 4x; Water: Medium; RayTracing: On; SM: 2048; TS: 512; CS: High; WE: Medium, AO: High; CR: 256; RR: Medium; LS: High; DoF, MB: Off, GCRR: High; CQ, TAQ, AT, RT, ST: Medium, Fauna: Off.

MEDIA

Please add a screenshot or video of the issue occurring.

[END OF FIRST USER REPORT]


:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

If relevant, provide additional screenshots/video:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:
• not sure if this is a bug or by-design. The C152 & 172 also have just 1 spot on the elevator (left one). Maybe by just moving the elevator on 1 side is enough as a verification since you should see the other side moving at the same time.

If relevant, provide additional screenshots/video: