ISSUE DESCRIPTION
Description of the issue:
The Transponder and COM Radio are both incorrectly illuminated at night.
If applicable, which aircraft is experiencing this issue:
Cap-4 Paulistinha
[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
No 3rd-Party or Community Addons (default installation) / Yes
FREQUENCY OF ISSUE
How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Every Time
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue:
- In free flight, start a flight cold-n-dark in the Cap-4 Paulistinha at any airport at night.
- Enter the aircraft (no need to do the walk-around). Turn off the flashlight.
- Note the Transponder is illuminated (Screenshot #1). The Com Radio is off & dark, as expected.
- Turn on the battery & avionics by toggling their switches at the back of the plane (use the flashlight if required).
- Turn on the COM Radio. Note that it now illuminates incorrectly (Screenshot #2). None of the COM frequencies can be seen.
- Turn on the Transponder (STDBY, GND, ON or ALT).
- Use the XPDR TUNE button to highlight the first digit,. Note how it becomes white & unreadable All digits exhibit this behavior (Screenshot #3).
- Use the weather widget in the toolbar to slowly change the time to daylight. Note how the excessive white bloom fades & the COM & transponder frequencies become visible (Screenshot #4). Conversely, moving from day to night will increase the white bloom again.
- The COM has black numbers on a white background. It appears to be the opposite of what it should be (white numbers on a black background), but may be correct in real-life (and so not a bug).
YOUR SETTINGS
If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.
What peripherals are you using, if relevant:
N/A
[PC Only] Are you using Developer Mode or have you made any changes to it?
Developer Mode is Off / No changes
[PC, MSFS 2020 Only] Are you using DX11 or DX12?
N/A
[PC Only] What GPU (Graphics Card) do you use?
Intel Arc 770 (16GB, v32.0.101.6314)
[PC Only] What other relevant PC specs can you share?
Build: v1.3.23.0
Hardware: i7-12700K, 32 GB 5200 MHz DDR5 CL40
Graphics Tab: Full Screen 4096 x 2160; HDR: On; Resolution: 2457x1295; AA: TAA; Render scaling: 60; AMD FidelityFX: 150; VSync: Off; FRL: N/A; Dynamic FRT: Off; TLOD: 400; OST Pre-Cache: Ultra; Disp. Map: On; Buildings, Rocks: High; Trees, Plants, Grass: Medium; OLD: 200; V. Clouds, Texture Res: Medium; AF: 4x; TS: 4x4; Water: Medium; RayTracing: On; SM: 2048; TS: 512; CS: High; WE: Medium, AO: High; CR: 256; RR: Medium; LS: High; DoF, MB: Off, GCRR: High; CQ, TAQ, AT, RT, ST: Medium, Fauna: High.
MEDIA
[END OF FIRST USER REPORT]
For anyone who wants to contribute on this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
•
Provide extra information to complete the original description of the issue:
•
If relevant, provide additional screenshots/video:
•