Condition levers moves differently

When I am flying aircraft with variable props and two engines it happens when I want to adjust condition levers, they are moving differently. With that, I mean that from 100% when I press button to reduce condition left lever moves more than right. Not continuosly but 1st and 2nd press of button, so difference between them is about 3-5%. If I press button more to reduce it further it moves together, also if I incrase condition they move together.

This happens no matter which button I use on HOTAS or keyboard and on all aircrafts with variable props.

I have the same problem, happens for instance with the new C310R. Curiosly, increasing the RPM via the prop lever moves the two simulatneously. Decreasing the RPM leads to the discrepancy you mentioned.

Looks like it is not a common problem.
My condition levers are not on two separate axis, they are on buttons. Ctrl+F2/F3 and on buttons on hotas, but both buttons have same functionality to move all condition levers together. At least that worked good in FSX.

I set fuel mixture in the same manner (Shift+F2/F3 and buttons on hotas) and mixture levers moves together both directions.

1 Like

Same issue here, I opened a bug report via Zendesk.

I found that the easiest way to demonstrate the issue is to hold the button to reduce the prop rpm as long as possible without it starting to move continuously. I wonder if the bug is that one of the levers is moved once per tap, while the other one moves according to the lenght of the press.

I have the same problem. Prop / Condition levers move in different speeds when using key presses.