So when i connect to my software to MSFS, It works fine but every 5 seconds it teleports to my place In real life, Then teleports me back Where I’m at in the flight simulator I tried to find the problem but nothing so i need help please.
Again, that’s an interesting bug, but you’re not telling me anything about your setup. It sounds like you have some software that is polling where you are and adding it to the stream. I’ve never heard of that before. What are you using for software and hardware? did you read the thread I posted above? I’d go through all your settings and make sure it’s set properly. Make sure you’re in simulation mode in Avare, and check all the sources it’s getting data from. You might be having it poll both the hardware GPS and software GPS Stream.
For those whose first language is not English, please remember that you can always write up your post in your native language on one of the many Internet translations sites, use the site to translate your post into English, and then cut-and-paste the English translation into your post on this forum. 
Yippe it works
Nvm I think my pc is not compatible for this 
As far as I’m aware, there are no translators for English Texting contractions… 
I’m sure your PC is compatible. You have an incorrect setting somewhere.
Make sure you have the correct version of FSConny, and read the thread I linked you too, on top of of course reading through the setup above.
Think i found the problem
1 Like
The fsuptic is interfering with the fsconny
1 Like
Uuuuuuuuggggg nothing is working
I just got AvareX (i.e. the new version of Avare) on my android smartphone working with FS2024 on my desktop gaming PC. I’m running xConn on my PC; the only change I made in xConn was to
open Properties → Output and
in the Network TCP/UDP IP-Adress I entered the IP address of my smartphone on WiFi i.e. the set of numbers beginning with 192.168. etc.
Note:
I have both my smartphone and my desktop computer on the same WiFi network.
In Xconn:
The Port was already set to 49002. use UDP protocol was already checkmarked.
In the Settings for NMEA: Under NMEA, all the options were checkmarked. Under Aviation Data Format, there was no checkmark for use Aviation Data Format.
In the Settings for Time: GPS Time had use FSX UTC button selceted.
In the Settings for Satellites: all three values for static Satellite Data were set to 1.0. The 3D Fix button was selected.
……….
I launched FS2024, entered a flight, started xConn on my PC, started AvareX on my smartphone - and it all worked, with AvareX displaying the information based on the aircraft in the sim.
Wow, cool, I didn’t know there was a new version of Avare (I still have the original on my phone I think)