FBWa320 - Pressurization Warning Bug

This has happened to me a few times now. When I pass through around 10,000 feet, the cabin altitude warning comes on, even though my cabin altitude is still safe at 4000 and with only modest Ft/Min change See screenshot below

I just cancel the warning and continue on the flight. Anyone have this issue?

image4.PNG

Yeah I had this issue as well before. I just cancel it and continue with the flight as you said.

If I remember correctly this usually happens when I connect a ground power at the gate at the beginning of the flight and for some reason it didn’t “fully disconnect” so the aircraft thinks there’s a leak in the cabin as there’s an open “door” somewhere. It could also happen if the jetways didn’t disconnect fully as well, but this usually noticeable with the cabin door being open when you taxi and take off. The ground power cause seems to be the one that’s less noticeable until the warning occurs.

I avoid this issue by making sure I fully disconnect all the ground vehicles before I even start to call the pushback car. That should allow the sim to fully close everything there is to close, so I don’t get the cabin depressurisation warning.

Will give this a try. Thank you!