ISSUE DESCRIPTION
Description of the issue: On the MFD in the PC-12 there is an option to view runway info via the scrollable flight plan at the top left of the display. If you click on the runway and then select ‘Show Info’ you get incorrect elevation data with ‘General’ selected. This appears to be showing the elevation in feet but it appears that it is in metres. I’ve checked a few and the elevation is approx correct if converting between feet and metres. In the example below the runway elevation is approx 778ft but the PC-12 shows it as 237ft
If it was 237metres elevation it would make it correct.
If applicable, which aircraft is experiencing this issue:
Pilatus PC-12 NXG
[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue? N/A
FREQUENCY OF ISSUE
How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Noticed for a few different runways
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue:
-
Import flight plan from EFB to PC-12
-
On the MFD scroll down the flight plan to the destination or departure runway
-
Click Show Info (note that the default ‘General’ selection is shown) and see elevation shown in ‘feet’ when it should be in metres (or multiplied by approx 3.28 if to remain in feet)
-
Change from ‘General’ to ‘Runway’ and the correct elevation is shown in feet.
YOUR SETTINGS
If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.
What peripherals are you using, if relevant:
N/A
[PC Only] Are you using Developer Mode or have you made any changes to it?
No
[PC, MSFS 2020 Only] Are you using DX11 or DX12?
[PC Only] What GPU (Graphics Card) do you use?
N/A
[PC Only] What other relevant PC specs can you share?
N/A
MEDIA
When showing info in the Database with ‘General’ selected the units are incorrect.
However in the ‘Runway’ section of the database it is correct
[END OF FIRST USER REPORT]
For anyone who wants to contribute on this issue, Click on the button below to use this template:
Do you have the same issue if you follow the OP’s steps to reproduce it?
•
Provide extra information to complete the original description of the issue:
•
If relevant, provide additional screenshots/video:
•