Flysimware Cessna 414A

Actually you do.

image

That’s the switch to the far left, the day/night switch. I’ll check on the overheads shortly, as I don’t think I ever configured them.

For the overheads use these. The B-events actually work here, and the LVAR’s do not.

image

1 Like

DAH…after starring at this for hours my eyes start seeing what they want to see.

thanks

1 Like

Any ideas about these problems I have? =(

Looks like stuff is mapped wrong.
disconnect all of your peripherals reboot and see if you still have the issues.
It a solid add on and it been around 3 years or so I would not expect any of this.

P.S.
If your using DX12 try turning it off

Yes, that’s a common problem with FSRealistic. The Prop Wash feature makes the aircraft move around, and an aircraft that moves around doesn’t display the static elements. Closing doors are another symptom.

Disable the Prop Wash effect in FSR to fix. It could also be the Wind Ambience feature. Don’t remember off the top of my head. Try both to be sure.

1 Like

Uninstalled FSR and the problems gone! =) Thank you. I have had other problems with FSR as well (sudden closups of instruments in flight cause me to crash), aswell ■■■ severe worse fps. This time i will keep it uninstalled.

As a rule of thumb, if the sim starts doing something unexpected that you’ve never seen before, remove every single third party addon you can, and re-test with Asobo default stuff only.

1 Like

Is there a way to get a clean windshield??

There is a third party mod, probably on FlightSim.to that has cleaned windshield options for a number of planes, but I don’t remember whether it includes the 414.

1 Like
2 Likes

The mod I was thinking of was this, which includes the 414, and a ton of other planes as well:

5 Likes

Forgot how much I like this plane…

2 Likes

Looks like an update in the Marketplace dropped today. Took some Googling, but found the change log in Avsim.com (couldn’t find on their website).

Found that the vars for the light sliders as well as the Master Battery changed, so had to do some Spad.next sleuthing to get those to work. It also locks to the left quickview instead of snapping back to the main view, which I find annoying, but can live with it. The only other plane that used to do this (both L and R) was teh VisionJet.

=================
C414A V 4.4.2
03-3-2024

Updates:

  1. Radio backlighting is now tied to the radio light dimmer slider.
  2. The interactive checklist was removed due to limitations. Use the tablet checklist and walk around.
  3. Un-slaved mode now requires DC power.
  4. Copilot altimeter 10K flag animation was missing.
  5. Spawning in air was added.
  6. Add new static port mesh and texture.
  7. Navomatic autopilot master bus/switch toggles off with avionics off or the yokes autopilot disconnect.
  8. Navomatic yaw dampers master bus/switch toggles off with avionics off.
  9. Check the hardware bindings xml included in the zip file. Battery switch requires an Lvar for logic.

Bugs:

  1. Pitch sync fixed.
  2. Tie-down hook under the wing was not animating to the down position.
  3. Cabin door light switch and the panel door light switch are now working on the hot battery.
  4. VOR knob, middle click and right click were swapped.
  5. Navomatic autopilot master bus/switch was stuck off and is fixed.
  6. The sliding light/lever controls on the center pedestal now display the tooltip value.

New Features:

  1. Pre flight walk around now brings the tablet along with you and includes next and previous click spots to navigate easier. Also includes a new return to cockpit tablet hotspot. The existing preflight decal now includes 7 click-spots to open new preflight checklists. And the best new feature is the new fuel sump check that was modeled. All walk around objects are clickable including each tie-down, chocks and 4 groups of wick covers. The active walk-around markers will now flash green to show your current location.
  2. PMS50 GTN750 non working title panel was removed.
  3. Added 10 new liveries so Xbox can have more options.
6 Likes

You can get the changelog file from their website, download the “MSFS PC & Xbox help files”.

Changelog resume from v4.4.2 :

=================
C414A V 4.4.2
03-3-2024

Updates:

  1. The interactive checklist was removed due to limitations. Use the tablet checklist and walk around.
  2. Un-slaved mode now requires DC power.
  3. Copilot altimeter 10K flag animation was missing.
  4. Spawning in air was added.
  5. Add new static port mesh and texture.
  6. Navomatic autopilot master bus/switch toggles off with avionics off or the yokes autopilot disconnect.
  7. Navomatic yaw dampers master bus/switch toggles off with avionics off.
  8. Check the hardware bindings xml included in the zip file. Battery switch requires an Lvar for logic.

Bugs:

  1. Pitch sync fixed.
  2. Tie-down hook under the wing was not animating to the down position.
  3. Cabin door light switch and the panel door light switch are now working on the hot battery.
  4. VOR knob, middle click and right click were swapped.
  5. Navomatic autopilot master bus/switch was stuck off and is fixed.
  6. The sliding light/lever controls on the center pedestal now display the tooltip value.

New Features:

  1. Pre flight walk around now brings the tablet along with you and includes next and previous click spots to navigate easier. Also includes a new return to cockpit tablet hotspot. The existing preflight decal now includes 7 click-spots to open new preflight checklists. And the best new feature is the new fuel sump check that was modeled. All walk around objects are clickable including each tie-down, chocks and 4 groups of wick covers. The active walk-around markers will now flash green to show your current location.
  2. PMS50 GTN750 non working title panel was removed.
  3. Added 10 new liveries so Xbox can have more options.

=================

=================
C414A V 4.4.3 HOTFIX
03-5-2024

Bugs:

  1. Battery switch is now on for runway and other flight files.
  2. The new walk around checklist cameras were set for widescreen and the tablet was not fully in view. All cameras are now updated for standard screen size and widescreen.

=================

=================
C414A V 4.4.4 HOTFIX
03-7-2024

Updates:

  1. Radio backlighting is now tied to the radio light dimmer slider.
  2. The tablet can be stowed after clicking the camera return to tablet.

Bugs:

  1. Light effects were having a conflict with the Lear 35 effects if you had both products installed. Fixed.
  2. Ambient lighting now turns ON only when DC power is ON, so the flashlight works.
  3. New code was added to ensure the altitude capture display in the GFC600 is accurate.
  4. The last two recent updates had the wrong CFG entry that caused the TDS GTN750 GFC600 autopilot altitude hold to capture the altitude alerter value. Fixed.

=================

=================
C414A V 4.4.5
03-13-2024

Updates:

  1. Added the Navomatic autopilot master swith Lvar to the bindings list in the zip package.

Bugs:

  1. Pressing the yokes autopilot disconnect push button will not illuminate the autopilot disconnect light. Turning off the Navomatic autopilot master switch will illuminate the autopilot disconnect light. Fixed.

New Feature:

  1. We now include a NO BLUE HIGHLIGHT package that you can place in your Community folder that will prevent objects from highlighting when you mouse over.

=================

=================
C414A V 4.4.6
03-14-2024

Updates:

  1. The ambient light intensity near the main panel was lowered.

Bugs:

  1. The AP disconnect light is no longer ON when flight loads.
  2. The map lights is no longer ON when flight loads.

=================

5 Likes

Thanks for calling out the change logs! I need to get out of the beta Airbus and back into the Chancellor!

New liveries, much appreciated on Xbox ! Thanks !

5 Likes

Surely the battery master var has not changed again. I’ve lost count of the number of times I’ve had to change stuff on this aircraft. Leave it alone.

Thanks…the location wasn’t very intuitive. Plus I see the Zip file has the new hardware bindings, so I’ll have to double check I didn’t miss anything.

Unfortunately the plane seems a bit messed up on xbox, While on the exterior view, the aircraft interior lod drops massively removing all details /seats/ pax etc when at normal zoom. Details draw back when zooming in. (SU 15 beta). Anyone else? I never had this problem before.

4 Likes

Now i can’t turn on/off battery using spad.next, idem for Autopilot, and this is a big problem