Help with DA62 Avionics Switch

Discussion Hub Home Cockpit Builders
,
1

I have a home built cockpit using Honeycomb Alpha and Bravo. I enjoy the DA62.

However, having much difficulty operating the Avionics switch with the Alpha. Can’t find the right binding to turn the switch on and off.

Through the FSUIPC7 Event trace, the log shows that the BUS_TO_BUS toggle is used to turn the switch on and of with bus 3 and 4.

The code I have used is:
4 3 (>K:3:ELECTRICAL_BUS_TO_BUS_CONNECTION_TOGGLE)

It attempts to attach Bus 3 (RH_Main_BUS) to Bus 4 (Avionics_BUS).

Cannot really tell if the switch is on or off except by observing the switch in the cockpit. There is no movement.

Other switches seem to work using events. This seems to use two indices. Battery works, fuel valve works. Just cant seem to find how to turn this switch on.

Even using the Option Controls binding from the Alpha to the AVIONICS_MASTER_SET or TOGGLE_AVIONICS_MASTER.

Any help to use this switch is highly appreciated.

2

Are you using the modded DA62X or the Asobo DA62? I am using the mod and this is how I have mine set up using Switch 17 Pressed AVIONICS_MASTER_1_ON and Switch 17 released AVIONICS_MASTER_1_OFF .

3

Mod DA62 Thanks.
How are you set up?

4

Hi, Just noticed that you are on Xbox, so I hope the bindings I pointed you toward will work.
I am on PC using the alpha and bravo setup with SPAD.NEXT
On the DA62x I have had good luck with the setup using sim based commands.