First, a couple of tips… I like to go from far left to far right on the overhead at one time. Nav lights, Battery, Generator, Fuel Auto-Select, and Trim/AP. Then after I initialize the center display, I go ahead and preset everything for the autopilot/navigation. I turn on the FD, but not the AP button. Then I reach back up and hit the starter and then run the start by the factory numbers. Move to Low Idle at 13%, the starter cuts out automatically at 52%, move to High Idle. Since you’re on a console, you need whatever the “secondary” interaction method is. On a PC, it would be to hold the left mouse button and tap the right to cross over from feathered to Flight Idle. I would highly recommend connecting a mouse and keyboard to the console if at all possible. It will make life much easier.