Honeycomb Alpha Yoke disables throttle on Cessna 152

User Support Hub Hardware & Peripherals
, , , ,
1

Hi all, I am a brand new to MSFS. I am using a Honeycomb Alpha Yoke and for some reason the yoke is disabling the throttle on the Cessna 152 when I am doing the training flights. Throttle on the keyboard or Xbox controller does not work when the yoke is plugged in. If I unplug the yoke the throttle works fine. The yoke and throttle also work fine on other planes like the Daher TBM 930.

I am using the default bindings for the yoke.

Any idea what settings I need to change for the yoke and throttle to work together on the Cessna 152 ?

Thanks for any info!

Matt

2

Does the throttle lever in the cockpit not move at all, or does it move but the engine stops?

If the latter I’d double-check that you’ve turned the key to the “both” magnetos position and that the battery and alternator switches are on; leaving these off may cause the default bindings to shut down your engine.

2 Likes
3

Thank you very much Vibstronium. I turned the key to both and throttle is acting like normal. I was starting to go crazy. Such an easy fix!

1 Like
4

Woohoo! Glad that did it. :smiley: