I can't request IFR with ATC on some G1000 aircraft

Bug Reporting Hub ATC, Traffic & NAVAIDs
, , , , , , ,
1

ISSUE DESCRIPTION

Description of the issue:

I can’t request IFR with ATC on some G1000 aircraft, for exemple, C208, C172 and Bonanza.

If I create a flightplan before enter in the flight, I can request, but If change the flightplan in EFB and send to ATC, the option of request IFR desapear.

No problems in others planes without G1000 standart.

I re install many times.

FREQUENCY OF ISSUE

Every time

[END OF FIRST USER REPORT]

:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?
•

Provide extra information to complete the original description of the issue:
•

If relevant, provide additional screenshots/video:
•

2

A flight plan with airports is a good way for others to help reproduce (or abrogate) the defect.

1 Like
3

Do you have the same issue if you follow the OP’s steps to reproduce it?
• yes (SU1 installed)

Provide extra information to complete the original description of the issue:

• test 1 using the C172 G1000, FP created using the insim EFB after having started the flight

  • select a parking spot at a controlled airport on the world map (I used KMCO)
  • start the flight
  • start the plane
  • open the EFB select a destination airport (I used KJFK) and generate an IFR flight plan
  • send the FP to ATC/avionics
  • open the ATC panel, select clearance: you’ll not have the IFR option

• test 2 using the C172 G1000, FP created using the insim EFB prior to start the flight

  • select a parking spot at a controlled airport on the world map (I used KMCO)
  • open the EFB select a destination airport (I used KJFK) and generate an IFR flight plan
  • send the FP to ATC/avionics
  • start the flight
  • start the plane
  • open the ATC panel, select clearance: you’ll have the IFR option

If relevant, provide additional screenshots/video:
•

4