If I set the landing airport, when I take off I will get very low FPS (low as 10fps)

[xkeyC]

Please tag your post with #pc and/or #xbox.
PC

Are you on Xbox, Steam or Microsoft Store version?
Microsoft Store

Are you using Developer Mode or made changes in it?
No.

Brief description of the issue:

My computer parameters: i7-12700f + RTX3070, 32GB-DDR4 3200 RAM,2T SSD,2560x1440 165Hz display.

When I set the departure and destination airports, I will get very low framerate after takeoff.

If I only set the departure airport and not the destination airport, then everything works fine for my FPS.

If a bigger plane is used then the FPS will be lower.

If no destination airport is set:

Of course, if I stay on the ground, the frame rate is normal:

Detailed steps to reproduce the issue encountered:

1. Arbitrarily set the departure airport and landing airport to start a flight
   

   

2. Good FPS when on the ground:
   

   

3. Take off, leave the airport, the frame rate will drop instantly:
   

   

4. Restart a flight, only set the departure airport, do not set the target airport, take off, the frame rate will behave normally:
   

   

PC specs and/or peripheral set up if relevant:
Default Ultra Graphics Settings.

Build Version # when you first started experiencing this issue:
1.23.12.0

zendesk:151341

[HethrMasn]

@xkeyC

Ultra Graphics Settings

That’s usually the problem.

[xkeyC]

Please read in full, when I don’t set the landing airport, I get normal FPS.

[HethrMasn]

If you’re flying the same route twice then the cache data could be improving your performance the second time.

[xkeyC]

Added: Dropped frames are persistent, I will get 10fps forever.

My hardware usage is usually low when persistent dropped frames occur:

[xkeyC]

@HethrMasn

If you’re flying the same route twice then the cache data could be improving your performance the second time.

No, I’ve changed planes dozens of times to do this test, and it’s only when the landing airport is set that I consistently get very, very low frame rates.

[Crabemichou]

Nasty FPS drop and lagging on take-off and landing

This was the fix I tried at the suggestion of Captain Sasso. Before launching the sim, navigate to Users>YourUserName>AppData>Local>FlightSimulator. There you should find a folder called “mapscache” and a file called “overrides.json”. Make a backup copy of these files, just in case. Delete these files. Launch the sim. I checked and found the sim had re-created new versions of the deleted files Check that Photogrammetry is switched ON. Choose your favourite plane and your favourite airport. Tak…

[xkeyC]

@Nasty FPS drop and lagging on take-off and landing

This was the fix I tried at the suggestion of Captain Sasso. Before launching the sim, navigate to Users>YourUserName>AppData>Local>FlightSimulator. There you should find a folder called “mapscache” and a file called “overrides.json”. Make a backup copy of these files, just in case. Delete these files. Launch the sim. I checked and found the sim had re-created new versions of the deleted files Check that Photogrammetry is switched ON. Choose your favourite plane and your favourite airport. Tak…

Thanks, i will try it

[HethrMasn]

That’s no fun if the cache makes your performance worse.

[xkeyC]

@Nasty FPS drop and lagging on take-off and landing

This was the fix I tried at the suggestion of Captain Sasso. Before launching the sim, navigate to Users>YourUserName>AppData>Local>FlightSimulator. There you should find a folder called “mapscache” and a file called “overrides.json”. Make a backup copy of these files, just in case. Delete these files. Launch the sim. I checked and found the sim had re-created new versions of the deleted files Check that Photogrammetry is switched ON. Choose your favourite plane and your favourite airport. Tak…

It doesn’t work.

[HethrMasn]

Enable developer mode and the fps graph. Make new screenshots. In the meantime I will see what happens on my PC between those two airports.

[xkeyC]

@HethrMasn

Enable developer mode and the fps graph. Make new screenshots. In the meantime I will see what happens on my PC between those two airports.

[HethrMasn]

@xkeyC

Detailed steps to reproduce the issue encountered:

I followed those steps using same airports, same runways, same plane, with no issue. I have graphics on mostly ultra except photogrammetry and live traffic is disabled.

Manipulators may include such items as:

• systems
• planes
• ai traffic
• live traffic
• stuff on ground, world
• weather
• simulation
• (not rendering)
• animations
• cockpits

[xkeyC]

I reset all settings except the control options and the problem persists.

I don’t know what happened.

[HethrMasn]

Do you have any addons? This is a standard question that appears in the template for reporting bugs.

[READ FIRST] About the Bugs & Issues category

This section is dedicated to bugs & issues for the core sim (not mods or 3rd party content) – Utilize the voting system and only post if you do not see your bug listed. Please post one bug per topic. This will help identify what could be the source of a specific issue but also help the community understand if they experience a similar situation. Before reporting a bug, follow these steps: Check if the issue has been identified in our Zendesk articles or Known issues Check if a similar threa…

[xkeyC]

Sorry I forgot to mention it, I have removed all addons (A plane) when I found this problem.

As you can see,the problem remains.

[xkeyC]

Tested the minimum picture quality, I got amazing FPS before takeoff, only 30 after takeoff.

When no landing airport is set, I get fantastic FPS.

So, what exactly is broken?

[xkeyC]

I have submitted an issue to zendesk with ID: 151341.

[xkeyC]

I’m using the Simplified Chinese version of Windows, and when I turn on “Beta: Use Unicode UTF-8 in worldwide languages”, everything goes back to normal.

English:

See also: c# - What does "Beta: Use Unicode UTF-8 for worldwide language support" actually do? - Stack Overflow

Test screenshot:

I don’t know why, but it solves the problem.

[MichaMMA]

another user which reported same:

Please solve the problem of low GPU occupancy

YES Windows Settings → Time and Language → Options in Admin area → "Beta: use Unicode UTF-8