IGN Switch misbehaving when using Thrustmaster TCa Throthle peripheral. (XBOX X)

ISSUE DESCRIPTION

When Ignition switch on the Thrustmaster throttle quadrant is moved to IGN / START position, the animated switch in the sim moves to IGN but springs back to NORM preventing engine start.

FREQUENCY OF ISSUE

every time

REPRODUCTION STEPS

  1. During engine startup, select IGN / START on throttle quadrant.

  2. Observe switch behaviour in the sim. It moves to IGN position initially but then springs back to NORM position.

  3. workaround is to manually move it to IGN with the cursor (circle and dot) and not exit the circle dot until engine starts. As soon as cursor is changed from circle dot to dot the switch springs back to NORM position.

YOUR SETTINGS

A320Nv2
Thrustmaster TCA Stick throttle and rudder

I can confirm the same issue in Inibuilds A350…

Please check the initial settings of buttons 21/22 and 25/26 as in the default profile coming with the sim TCA Sidestick X (XBOX) 2024 Planes (Airplane controls (8). The easiest way is to create a new (temp) profile and do the test.

Would you able to share a screenshot of what your settings are for each of the buttons associated hardware IGN switch. I have made changes historically to IGN function firstly when I transitioned from msfs2020 last year and also through various betas in mafs2024 - and have tried what you suggested because I thought that was the problem but no difference.

BTW I have separate custom profiles for A320 and A350 and have tested with default TCa profile and my existing profiles and created new profile.

OMG I finally figured it out after 30-40 different combination attempts and chat gtp :slight_smile:

Solved!

  1. SET ENGINE CRANK MODE map to joystick button 25 toggle Input Repetition to ON all other toggle switches OFF

  2. SET ENGINE IGN/ START MODE map to joystick button 26 toggle Input Repetition to ON all other toggle switches OFF

  3. SET ENGINE NORM MODE need to configure both PRIMARY and SECONDARY control

Primary - map joystick button 25 and set control on RELEASE (ON) all other toggle switches OFF

Secondary - map joystick button 26 and set control on RELEASE (ON) all other toggle switches OFF

Moved out from Sim Update 7 Beta | MSFS 2024 since not beta related.

That are just the default settings as I mentioned in my initial answer to you…