Is there something going on with wind or runway friction?

[Flightsimmer845]

You are right with the force feedback. One needs to get used to the differences in aileron input.

Also see here:

C172 flight model incorrect

Just tried. The C152 is not correctly modelled as well. After setting everything up the aircraft flips over to the left and goes into a spiral dive. In real life it would stabalize itself. I also noticed, that the yoke seems to be just locked into it´s last position and does not move according to forces acting on the controlsurfaces while turning loose without pilot´s intervention. This would explain why it is not stabalizing itself. Instead, the last position of the yoke being fixed hinders a…

After figuring out that I had a settings issue the last couple of flights proved the wind model to be quite good. The wind increases up from the surface and into the proper direction. While on the ground the wind hitting the vertical stabalizer pushing the aircraft into the wind is modelled well. Again the non continous (because of no force feedback) aileron input is not like in real life. But without an according yoke (Brunner etc.) this is owed to being a simulation.