Issues with velocity flight yoke on PC

User Support Hub Hardware & Peripherals
, ,
1

Hi all,
I seem to have an issue with turtle beach velocity flight yoke in the sim on my PC.
In the sensitivity settings you can see the yoke has full movement on the curves but when in the aircraft the yoke on the plane hardly moves at all.

When I go to external view you can see full movement of the surfaces but when switch back in the cockpit there’s hardly any movement and its making flying difficult.

I also have a thruster master plugged into the pc for my spitfire and tiger moth which seems fine.

I have checked that the firmware is the latest version, input mode set to PC and single prop.

Hope someone can help
Thanks
Mike

2

Have you tried unplugging the Thrustmaster? There may be some identical bindings with the TB V1.

1 Like
3

Hi, yes I’ve unplugged the thrustmaster but it makes no difference. I’ve also done the re-calibration process on the V1 but still the same.

The V1 aileron and elevator work fine if viewing the aircraft on external camera but when seated in the cockpit there’s hardly any movement. Could it be a camera issue ?

4

Al sorted & now working fine. You were right is was sharing cockpit view bindings.
Thanks

1 Like