Ah, yes. I was initially unsure about opening up all the screws to get inside. But after seeing your comment I decided to give it a go, and indeed, there was one wire that had snapped of its connection. I cut some of the wire end out of the insulation and attempted to solder it back in place. I reinforced it with the a bit of hot glue on the insulation. Tested on the computer and the z-axis is back! It seems as there is another set of wires/cables that rubs these connects when you move the z-axis motion (which is not a great design). I tried to position the wires to best avoid friction but wouldn’t be surprised if it ended up happening again… I appreciate the insight! Happy flying!
1 Like