my Logitech throttle is only 0% and 100% no in between like a switch from 0 throttle to 100%
Are you using the throttle axis control?
1 Like
YES
That looks to be the correct control in the application. Do you have another lever you can try to assign and see if that works? It could be something with that specific lever?
just tried all levers all did the same thing and the mixture red lever only went to 50%
There is this thread also on the topic for the separate throttle quadrant that sounds like some folks are having the same issue.
I saw these and they don’t seem to have a fix
These controls aren’t bound to some other item besides your throttle quadrant possibly causing a conflict?
only bound to throttle axis
At this point I think I’m fresh out of new ideas.
Alright thanks for trying to help
What do they look like in the Windows Game Controllers configuration? Also have you calibrated them there?
i think so but ill try again
on calibration its smooth
I’m having the same problem. Throttle and mixture are binary 0 or 100 (I haven’t tried prop yet).
For what it’s worth, this throttle quadrant is one of the add-on quadrants that usb plugs directly into computer. ie) it’s not one of the quadrants that plugs directly into the yoke.
Weird. I’m using that, as well, and I have not run into this problem. Maybe try setting “Steam Input Per-Game Setting” to “Forced Off” in the properties page of MSFS on the general tab, if you’re on the Steam version. That apparently has helped some people with peripheral problems.
Run the Logitech utility for the stick and check the curves.
Tried this and nothing happened 
Mine is working properly now. Somehow it got fixed while I was making other changes for other reasons.
I upgraded a bunch of stuff on the computer:
-new motherboard, ram, cpu
-new gpu
-windows and driver updates
-reinstalled msfs 2020
So yeah, that’s all you have to do…
I still haven’t resolved my “Jump from 0 to 50%” quadrant lever problem. I was guessing it is due to an erroneous detection of the type/category of the Logitech Throttle Quadrant during initial software installation; hence, reinstalling might help.
Anyone knows how to save all the keyboard and controller bindings, and restoring them after re-installation?