MSFS 2024 Airport / Helipad Issue Tracker

[Ijonesfr]

ISSUE DESCRIPTION

Description of the issue:
After pass this bridge, aircraft enter in bitum and stop.

ICAO, coordinates, or specific location:
LFPG, see images

[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?
Yes

FREQUENCY OF ISSUE

Each time

How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Each time

REPRODUCTION STEPS

1. Put the aircraft everywhere you want
2. Roll over this bridge (note: existing a step to enter and out of the bridge)
3. Trouble occurs

YOUR SETTINGS

If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.

What peripherals are you using, if relevant:

[PC Only] Are you using Developer Mode or have you made any changes to it?
No

[PC, MSFS 2020 Only] Are you using DX11 or DX12?
FS2024 is DX12

[PC Only] What GPU (Graphics Card) do you use?

[PC Only] What other relevant PC specs can you share?

MEDIA

Please add a screenshot or video of the issue occurring.

[END OF FIRST USER REPORT]

-@-----

[Azlog]

ISSUE DESCRIPTION

Similar to Munich airport, EDDM, you can’t taxi over the bridges at Kai Tak without crashing

ICAO, coordinates, or specific location:

VHHX

FREQUENCY OF ISSUE

How often does this occur for you (Example: Just once, every time on sim load, intermittently)?

Every time

REPRODUCTION STEPS

Please list clear steps you took in order to help our test team reproduce the same issue:

1. Land at Kai Tak VHHX and try to taxi over one of the bridges. Your aircraft will be launched into the air and land back down damaging the landing gear and resulting in a crash landing

YOUR SETTINGS

If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.

What peripherals are you using, if relevant:

Xbox Series X - no addons

MEDIA

Please add a screenshot or video of the issue occurring.

https://www.xbox.com/play/media/eLf5ybMhQf

[END OF FIRST USER REPORT]

---

For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?
•

Provide extra information to complete the original description of the issue:
•

If relevant, provide additional screenshots/video:
•

[ORFK]

• Identifier - CYGI
• Name – Wrong Lake Airport
• Category – Runway
• Description – Trees at the end of the runway

[Azlog]

Airport - Dublin
Identifier - EIDW
Category - Apron
Issue - the whole apron (east parking at the gates) is in a basin. As soon as you release the parking brakes, you roll back at high speed into the centre and up the other side

[TarsalThrower95]

KTEB Teterboro Airport Runways Buildings on the ends of each runway 1/8/25

[EvanDan856]

Using the template below will greatly help the team reproduce the issue and ease the process of fixing it. Before posting, search for an existing report. If you are not sure it’s a bug, please first report in User Support Hub.

2 tags are required - add them in the tag section next to the title above:

• One for iteration (msfs-2020 or msfs-2024)
• One for platform (ms-store, steam, xbox, or xcloud)

Feel free to delete this quote section after adding your appropriate tags.

---

ISSUE DESCRIPTION

Description of the issue:

33PA is a hospital helipad not an airport. I was placed there in career mode.

ICAO, coordinates, or specific location:

[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?

FREQUENCY OF ISSUE

How often does this occur for you (Example: Just once, every time on sim load, intermittently)?

REPRODUCTION STEPS

Please list clear steps you took in order to help our test team reproduce the same issue:

YOUR SETTINGS

If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.

What peripherals are you using, if relevant:

[PC Only] Are you using Developer Mode or have you made any changes to it?

[PC, MSFS 2020 Only] Are you using DX11 or DX12?

[PC Only] What GPU (Graphics Card) do you use?

[PC Only] What other relevant PC specs can you share?

MEDIA

Please add a screenshot or video of the issue occurring.

[END OF FIRST USER REPORT]

---

For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?
•

Provide extra information to complete the original description of the issue:
•

If relevant, provide additional screenshots/video:
•

[SaprPavel6630]

• Identifier - PASY
• Name – Eareckson As
• Category – Runway, Taxiway
• Description – Missing all markings on runway, taxiways, apron, as well as any taxiways/parking definitions in FS
  
  

[TenNight5500570]

Using the template below will greatly help the team reproduce the issue and ease the process of fixing it. Before posting, search for an existing report. If you are not sure it’s a bug, please first report in User Support Hub.

2 tags are required - add them in the tag section next to the title above:

• One for iteration (msfs-2020 or msfs-2024)
• One for platform (ms-store, steam, xbox, or xcloud)

Feel free to delete this quote section after adding your appropriate tags.

---

ISSUE DESCRIPTION

Description of the issue:

Northam airport YNTM, has multiple trees on the taxiway

ICAO, coordinates, or specific location:YNTM

[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?

FREQUENCY OF ISSUE

How often does this occur for you (Example: Just once, every time on sim load, intermittently)?

PERSISTENT

REPRODUCTION STEPS

Please list clear steps you took in order to help our test team reproduce the same issue:

1.Taxi down the taxiway at YNTM, you hit trees
2.
3.

YOUR SETTINGS

If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.

What peripherals are you using, if relevant:

[PC Only] Are you using Developer Mode or have you made any changes to it?

[PC, MSFS 2020 Only] Are you using DX11 or DX12?

[PC Only] What GPU (Graphics Card) do you use?

[PC Only] What other relevant PC specs can you share?

MEDIA

Please add a screenshot or video of the issue occurring.

[END OF FIRST USER REPORT]

---

For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?
•

Provide extra information to complete the original description of the issue:
•

If relevant, provide additional screenshots/video:
•

[Holzkasper01]

The runway alignment for Zwickau Airport (EDBI) is incorrectly stored in the MSFS. Zwickau Airport has the following data (according to www.acz.de/flugplatzdaten )

Elevation: 1050 ft / 320 m
Coordinates: N 50° 42’ 18" ; E 012° 27’ 57" 2 NM SW Zwickau
Frequency: 130.660 MHz
Call sign: Zwickau Radio
Runways: RWY 24/06 (800 m long x 40 m wide) with 200 m runway extension on both sides
Traffic circuits: Separate for motor flight (2000 ft), ultralight (1700 ft) north of the RWY and gliding in the gliding area south of the RWY
Fuel: Avgas 100 LL, Jet A1, Mogas
Radio navigation: 180°/44 NM from LEG 115.85 246°/47 NM from DRN 114.35 003°/38 NM from OKG 115.70
Approved for: aircraft up to 5700 kg MPW; helicopters; motor gliders; gliders; ultralight aircraft; hang gliders; paragliders; free balloons PPR; airships PPR; parachute operations;
not approved for IFR and VFR night

[mac9x9]

06D Rolla Muni Grounds and Facilities Building on paved taxiway to RW32 01/09/2025

[mac9x9]

Using the template below will greatly help the team reproduce the issue and ease the process of fixing it. Before posting, search for an existing report. If you are not sure it’s a bug, please first report in User Support Hub.

2 tags are required - add them in the tag section next to the title above:

• One for iteration (msfs-2020 or msfs-2024)
• One for platform (ms-store, steam, xbox, or xcloud)

Feel free to delete this quote section after adding your appropriate tags.

---

ISSUE DESCRIPTION

Description of the issue:
06D Rolla, ND building on taxiway leading to RW 32.
MSFA 2020 Steam version.

[PC Only] Did you remove all your community mods/add-ons? If yes, are you still experiencing the issue?

FREQUENCY OF ISSUE

Always
How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Always

REPRODUCTION STEPS

Load 06D in sim and taxi to RW 32
Please list clear steps you took in order to help our test team reproduce the same issue:

YOUR SETTINGS

If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.

What peripherals are you using, if relevant:

[PC Only] Are you using Developer Mode or have you made any changes to it?

[PC, MSFS 2020 Only] Are you using DX11 or DX12?

DX 12

[PC Only] What GPU (Graphics Card) do you use?

[PC Only] What other relevant PC specs can you share?

MEDIA

Please add a screenshot or video of the issue occurring.

[END OF FIRST USER REPORT]

---

For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?
•

Provide extra information to complete the original description of the issue:
•

If relevant, provide additional screenshots/video:
•

[EvanDan856]

59AK has trees at end of runway

[FlyingDiggs]

VABB

Jetways not connected, floating in air.

[edufdzmac]

Last year Guadalajara Airport MMGL in Mexico open a new runway which is not in the simulator 2024 map. Now the airport have 11L/29R and 11R/29L with also changes in taxiways.

Please update this airport in the free world map. Is a HUB for Mexico operations.

[GeeStoerty]

• Identifier - LSGC
• Name – Les Eplatures
• Category – Airport
• Description – high residential building at runway aproach (in real: low industrial building)

FUN FACT: the satellite images of Google and Bing show it as RW06, not RW05 as in FS2024. Not sure which is newer

[RookieOneqc]

According to navigraph, it’s supposed to be 5/23, so it may had been renumbered 1 or 2 years ago (last update to Jeppensen chart is from 2023)

[LN20095]

Memmingen Allgau Airport EDJA Germany scenery tereng broken
career mode i crash already point are lost

[GeeStoerty]

• Identifier - LFNL
• Name – st martin
• Category – Airport
• Description – see screenshot, split runway with grass in the middle

[FlyingDiggs]

• Identifier - KMSY
• Name – Louis Armstrong New Orleans International Airport
• Category – Airport
• Description –
  • Taxi signs are one-sided and blank on one side.
  • Missing Golf taxiway
  • Missing G8 Taxiway
  • Missing the entire north ramp and terminal
  • Taxiway Hotel has a major speedbump due to uneven terrain
  • Taxiways marked incorrectly

The red area int the image is missing–Taxiway Hotel links to Taxiway Golf prior to G7.

[FlyingDiggs]

• Identifier - KLBB
• Name – Lubbock Preston Smith International
• Category – Airport
• **Description

• Taxi signs are one-sided and blank on one side.
• Taxi signs labelled incorrectly, “Bravo is labelled Echo” etc.