It was always going to be this way. Some of the 120 default aircraft are worth trying out though, but I still prefer the Fenix for now.
Figured out how to get into the airplane cabin. You need to turn on the external camera and press shift+9, and you will get into the cabin and be able to move around there.
4 Likes
I guess with GSX we may never see passengers boarding/sitting down with an open cockpit door, or set up a passenger seat view with a spare cockpit custom camera. They went for the wrong door to exit the aircraft with a click. But maybe itās also a resources thing with a virtiual cabin not avaialble in cockpit walkaround mode. Interesting find though, I had only used drone camera before.
I believe thereās already a mod on TO to fix the mirroring of PFD?
Still No landing/taxi lights even the nav beacon light
i typed in the wrong topic.
havent tried the B738M, hoping they have fixed the insane bloom.
yep. still 0 lights for this thingā¦shame
1 Like
the 737 max keeps crashing my sim. some times when i start a flight and other times when i fly for 2 or three hours.
Anyone finding itās a tad sensitive on the throttles, move just a couple of mm and Iām at TOGA. Also, it canāt seem to hold a speed properly under 230kts. That and the transponder, which thanks to the folks above, is workable if a little frustrating (
).
Overall, just needs some tweaking, and hopefully unencrypting so I can get a Ryanair livery on it. When you compare it with the V1 A320 Neo in the original 2020, itās miles apart.
Go back to your plane choice(MAX) and choose another liverie and then you will get the lights.
Thanks yes it work on the passenger Var, but not on the BBJ, how about the Cabin Lights?
I bought this airplane, not new, for 74 million, made the necessary repairs for the flight, made two flights for 6 and 2 million. On the third flight, on the climb, I turned on the autopilot, got a sharp dive and a crash. 86 million in repairs. I donāt understand the reason at all. Load was 52%, trimmer 3.25. Engine power 100%. Target altitude on set FL360. After V1/rotate I pulled the joystick all the way down, the runway separation was at the very end and the climb was so hard. And at the end when switching to autopilot - it just pointed it into the ground. Has anyone had this happen???
Translated with DeepL Translate: The world's most accurate translator (free version)
I Got my Logitech autopilot and switch panel working but this seems to be the route cause of the game crashing when connected to my Logitech autopilot system so I canāt use this plane or the new inibuilds Airbus aircraft with it yet so I might have to get a winwing 
not sure if this is a Max feature or not (Im used to the NG), but I cant seem to pre-set the Altimeter Baro during descent. It doesnt allow me to pre-set a higher value than default.
And the autopilot has a hard time, and I mean struggling a lot with the throttle, as I am slowing down and extending flaps on final.
Iām having issues with the baro (and other centrol dial buttons) too. The centre button is INOP in legacy mode, so setting std pressure is only ever achieveable by hitting the ābaroā button (in my case I set it back to ābā on my keyboard) and only at 18000ft. So I canāt say set std pressure at 6000ft. I can still rotate the baro dial to be set to whatever I want it to be though.
Yes, on final the engines seem to hunt up and down a lot. Spooling up and down to stay on G/S seems to me like it should be a smoother engine control process. Itās also very noticable with the changes in engine sound while this is happening. Maybe Iāll try a manual approach the next time.
Has anyone fly this plane in career mode? Is the ārespect condition of the aircraftā always at 0%? I flew it both in āfreelancerā and āemployeeā and always received 0% for this category. Iām just wondering if Iām flying it wrong and not taking care of it or this is common for everyone else. Thanks
You need to right-click the buttons on the knobs. Let clicking doesnāt work.
1 Like
hold left and then right click, if thats what we are talking about.
mouse1+2.
Has anyone tried pre-setting the QNH during descent before you change to it at transition level?. For whatever reason I can not set it to anything higher than default. Maybe its by design in the Max compared to the NG.
1 Like
Just right clicking works for me. No need to hold left button.
Thats is rightā¦i also found out, that only works out with passenger choiceā¦bur never mindā¦it works!