- I’d recommend all USB peripherals be routed through externally powered ports and making sure that the settings in Device Manager for all USB ports and HIDs do not allow the PC to power them off. 2) Is the correct XMP profile for your RAM selected in your bios? If not, it not be running at 3600 mhz. 3) Def concur with going to a 1000W power supply. 4) HAGS off! 5) Concur w adding a GPU brace. 6) If you’re running at 4k resolution on your monitor, try dropping to 2560x1440 (or similar, depending on your monitor). 7) If hyperthreading and/or hardware virtualization are on in bios, try turning them off. 8) Finally, don’t make all your changes at once. It’s tedious to make them one at a time, but it’s the only way to know what fixed the problem(s). Good luck!
1 Like