No engine information on King Air 350 avionics

[pa01os]

Hi newbie here. I am having a problem with the PFD / MFD on the King Air: When I load it up the PFD displays ok but has the right hand windows for the engine readouts showing but there is no information in it.

The MFD is a split view with the PFD info showing on the left and the MFD info on the right and the same blank engine instrument panel on the far right. If I click on Full the screen fills with the PFD info when I want the MFD info.

In all cases none of the engine parameters are displayed.

Any one know how to sort it?
Thanks

[N316TS]

Hi there,
Welcome to the forums!
I have moved your post to the Aviate, Navigate, Communicate subcategory and edited the title so that people would know your question without having to click into the post.

[ResetXPDR]

The engine display should look like this with battery and avionics master switches on and engines off.

With both engines running and throttle closed it should look like this:

At full throttle it should look something like this:

Is this what you are seeing? If something else, please post up a screen shot.

[pa01os]

Hi Reset, thanks for responding, cute dog btw, I have a beagle lab cross!

After some troubleshooting I think I have narrowed it down to a livery issue, I have several sets of liveries for the 350 but this problem only occurs with one set, see below;

And this is the effect on the aircraft displays. As you see the centre panel only displays the PFD info (twice if you click split) rather than the NAV/GPS route and none display the engine instruments.

Not the end of the world but a bit annoying given it was purchased from the marketplace.

Thanks
Paul

[soldiertiger544]

Me also i bought the same livery pack as shown and now same problem…plane flies ok but not showing all display…