Nosewheel steering get stuck while breaking in a curve an getting below 10kts

User Support Hub Aircraft & Systems
, , , , , , ,
1

Using the template below will greatly help the team reproduce the issue and ease the process of fixing it. Before posting, search for an existing report. If you are not sure it’s a bug, please first report in User Support Hub.

3 tags are required - add them in the tag section next to the title above:

Feel free to delete this quote section after adding your appropriate tags.

ISSUE DESCRIPTION

Description of the issue: while driving in a curve and breaking then below 10kts lets the nosewheel get stuck in that position. the a straight ahead is possible do steer in the opposite direction, but if you get then over 10kts again, the stuck goes away and also the rudder will move. below 10 kts the rudder also dont move. if the steering gets stuck, you will see it also at the rudder.

I noticed this on this aircraft: Cessna C172, Diamond DA40, Cirrus SR22, Diamon DV20, Piper PA28, Cessna C182Q (Carenado). Maybe it affects also other aircraft. But for me it looks like an Sim issue, because i have there also the C182Q from the marketplace where this happens.

Please take a look at the video.

FREQUENCY OF ISSUE

How often does this occur for you (Example: Just once, every time on sim load, intermittently)?

everytime dirving on the ground with a plane.

REPRODUCTION STEPS

Please list clear steps you took in order to help our test team reproduce the same issue:

  1. happens everytime steering while breaking from over 10kts to below 10kts.

YOUR SETTINGS

If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.

What peripherals are you using, if relevant:

[PC Only] Are you using Developer Mode or have you made any changes to it? no Dev mode

[PC, MSFS 2020 Only] Are you using DX11 or DX12? PC MSFS2024

[PC Only] What GPU (Graphics Card) do you use? 4060 TI

[PC Only] What other relevant PC specs can you share? Turtle Beach Velocity One Flight Deck

MEDIA

2

By any chance could you test with another device than the Turtle Beach and/or using the controller default profile if you customized it ?.
This issue has not been reported so could be a local one with your hardware/settings.

3

i tried it with the default controller profile and no changes. still the same. but i think its a sim bug, because of the rudder movement at 10kts or higher and below 10kts no movement of the rudder.

before SU6.1 all was ok. so i dont know what was changed in that update.

4

ok. found the problem. it wasnt the hardware. it was because “FS Realistic” was running in the background and caused this problem.

topic can be closed.