So I recently began using the Logitech Yoke System (yoke and throttle quadrant).
The first few uses I recall being great with no issues.
Now all of a sudden there are two things that are happening that I’m not sure how to fix- tested this on Cessna 172 and Cessna 208.
- When taking off the plane pulls hard to the right. When I have to fight it to keep it straight and it makes for a horrid take off. Then once airborne I will level the plane out and the plane will begin slowly turning right if I let go of the yoke.
I went to my control panel and re calibrated the yoke but this gave no fix. Still having that issue.
- The second issue, which I assume will be something I’m just over looking, is the throttle. When cold and dark the throttle is at 0% and my throttle lever on the quadrant is at 0% a well. Good.
So when the plane is on as I begin increasing throttle, the lever in game does not move until I reach 100% on the Quadrant lever then it jumps to 100% in game.
Then I bring it back down to 0 -idle (quadrant lever) and the in game lever jumps to 50% even though I physically have the lever at 0%. At that point I can’t bring the engine down to idle or anything in between 50% and 100%.
This definitely was not happening. Before everything was smooth and the lever worked in sync with the in game lever. If I wanted 75% throttle I could put the quadrant lever there and the in game throttle would be 75% as well.
If anyone has any idea what’s going on here I would appreciate the help. At this point i can’t fly with the lack of throttle control and self pulling plane.
Thanks in advanced!