Program crash only with Airbus and Boeing

FS 2020/updated: the program crash only occurs with Airbus / Boeing. All other aircrafts can be flown without any problems. The settings of the Airbus \ failures are all off.
Airbus on the airport runway: Take off works, program crashes shortly after take-off.
Airbus in the air: program crashes immediately after the start of the flight.
(PC: i7-6800 3.4GHz / RAM 32GB / Nvidia GTX1060 / Joystick Saitek X52)

Hi @Klaviergerry - Sorry to see you’re having an issue.

There are quite a few threads on the forums where people are reporting crash to desktops and it seems there is no one single cause. Reports indicate that the ‘fix’ for one user doesn’t work for another user etc. Tracking down the cause is very time consuming. I suggest maybe using the forum search function to find other threads for this issue. If you wanted to be brave, even though it is time consuming, you could take the plunge and go ahead and reinstall windows. It might actually save you time in the long run. However, it doesn’t guarantee that it will solve your problem if the CTD is caused by hardware weaknesses (unlikely but possible) or driver issues.

To get you started, here are two links (Link1, Link2) to existing mega-threads about CTDs.

It would also be a good idea to check out the known issues post to see if you are affected by one of those.

For advanced troubleshooting, if none of the other fixes seem to work, then there may also be some useful information contained in this detailed thread: Community Troubleshooting Guide.

1 Like