ISSUE DESCRIPTION
Description of the issue:
The Just Flight Avro RJ is autoland capable, but since SU4, this procedure cannot be executed. During the final phase, instead of completing the procedure, the aircraft autopilot logic initiates a go around. See the issue discussed in this thread. Users on SU4 cannot complete autoland whilst users on SU3 can.
FREQUENCY OF ISSUE
How often does this occur for you (Example: Just once, every time on sim load, intermittently)?
Every time.
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue:
-
Select an airport that offers Cat III capability
-
Configure the aircraft for autoland as per the manual and note the requirements:
The autopilot must be engaged prior to 1,000 ft AGL and remain engaged thereafter.
• Flap 33° must be selected.
• A minimum of three engines must be operating at the start of the approach.
• The runway must be at least 45 m wide.
• The glideslope angle must be at least 2.5° and not more than 3.6°.
The autopilot must not remain engaged throughout an ILS approach, touchdown and rollout, unless the Category 3 status annunciator is lit -
Confirm in the aircraft that the autoland indicator is lit and attempt the autoland. On touchdown the audio cues, autopilot and autothrottle will attempt to initiate a go around.
YOUR SETTINGS
If the issue still occurs with no mods and add-ons, please continue to report your issue. If not, please move this post to the User Support Hub.
What peripherals are you using:
Honeycomb Alpha and Bravo (confirmed no binding conflicts)
[PC Only] Are you using Developer Mode or have you made any changes to it? No
[PC Only] What GPU (Graphics Card) do you use? RX9070
[PC Only] What other relevant PC specs can you share? See profile
MEDIA
Please add a screenshot or video of the issue occurring.