*RESOLVED* ATR-72 ramp detent moves throttle to full reverse

Bug Reporting Hub Resolved
, , , ,
1

:wave: Thank you for using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.

Are you using Developer Mode or made changes in it?

No

Have you disabled/removed all your mods and addons?

Yes

Brief description of the issue:

Moving the throttle to ramp power moves the throttle to full reverse. After pushing past ramp the throttle moves forwards to max power. Note in the video the second clunk is the ramp detent. You can see there it moves to full reverse while the max power and notch values work fine.

edit: Here’s the specific values for the detents.
Idle: -8257
Notch: 6613
Ramp: 11983

Provide Screenshot(s)/video(s) of the issue encountered:

IMG_0170.MOV - Google Drive

Detailed steps to reproduce the issue encountered:

Go through the throttle setup and try to set the ramp setting to a specific value.

PC specs and/or peripheral set up if relevant:

Virpil T-50CM3 Throttle

Build Version # when you first started experiencing this issue:

1.32.7.0

Edit:

Issue resolved itself, no idea why or how. I will say I used a throttle axis on my joystick to bind the throttle. Then checked if it worked and it did with my joystick. Then I switched back to my throttle and it worked for that when I set it up.

:loudspeaker: For anyone who wants to contribute on this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

If relevant, provide additional screenshots/video:

3

I’m having the same issue with my Logitech Extreme 3D. Throttle is very erratic. After several attempts to calibrate in EFB I’m unable to get it go to reverse.

1 Like
5

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

If relevant, provide additional screenshots/video:

I would like to add that it was an update some time ago that sent a lot of the default aircraft or specific to Asobo turbines into this mess. An Airbus you have to lift the finger flaps, but most turboprops have one solid limit each way with limited gates.

This ATR suffers from the same issue as others where the 100-0 zone has reverse built into the 100-0. Even the beta range on this is way to small that it really doesn’t do any good.

Granted, most folks investing in this hobby have a Thrustmaster Warthog or some other high end setup. Those who don’t have older hardware or limited hardware making planes difficult.

Now…did you trying deleting all your mods and sim. Try reinstalling everything clean spending the rest of the week trying to reconfigure all your settings back to the way you had it. Surely we would do this for a $13 marketplace plane. :joy:

6

OP indicates problem solved.