Starting G36 manually

User Support Hub Aircraft & Systems
, , ,
1

:wave: Thank you using the Bug section, using templates provided will greatly help the team reproducing the issue and ease the process of fixing it.

Are you using Developer Mode or made changes in it?

No

Which aircraft are you using that experiences this issue?

G36 Bonanza

Brief description of the issue:

Can’t start it manually. Auto mode (CTRL-E) still works

Provide Screenshot(s)/video(s) of the issue encountered:

Detailed steps to reproduce the issue encountered:

Start manually Cold and dark

PC specs and peripheral set up:

Z390-P BiosVer 30043
Processor Intel(R) Core™ i7-9700K CPU @ 3.60GHz 3.60 GHz
Installed RAM 32768.0 GB DDR4 2666MHz

Processor Intel(R) Core™ i7-9700K CPU @ 3.60GHz 3.60 GHz
Installed RAM 32.0 GB
System type 64-bit operating system, x64-based processor
Samsung 970 EVO plus 2 TB Gen 3x4 NVMe drive

Edition Windows 11 Pro
Version 23H2
Installed on ‎1/09/‎2024
OS build 22631.3007
Experience Windows Feature Experience Pack 1000.22634.1000.0

NVIDIA GeForce RTX 4070ti with 12g memory
Driver 551.23
DisplayPort
G Sync Monitor: Dell 27 Gaming Monitor - S2721DGF
HP Reverb G2
Re-size bar - enabled

Honeycomb Alpha & Bravo
Thrustmaster TPR Pedals

Internet Speed
281.6 Mbps download
94.3 Mbps upload

Are you using DX11 or DX12?

Are you using DLSS?

DLSS & TLA are the same

:loudspeaker: For anyone who wants to contribute to this issue, Click on the button below to use this template:

Do you have the same issue if you follow the OP’s steps to reproduce it?

Provide extra information to complete the original description of the issue:

Are you using DX11 or DX12?

Are you using DLSS?

If relevant, provide additional screenshots/video:

2

Do you have the same issue if you follow the OP’s steps to reproduce it?

No

Provide extra information to complete the original description of the issue:

Started a flight at KFAA at a parking spot on the apron, cold & dark. Brought up the checklist & followed the procedures therein. The G36 started without any problems.

Are you using DX11 or DX12?

DX12

Are you using DLSS?

No, Using TAA

If relevant, provide additional screenshots/video:

4

Looks like you have lots of switches bound to hardware so it’s hard to know exactly what you’re flipping and what you aren’t, but did you select a fuel tank? Trying to remember but I think it’s on the floor in the G36.

5

That was all using the mouse. Default is left tank. I see what you are talking about I will get a lower resolution video

6

Are you using the fuel boost pump before starting the engines?
After turning on the battery & alternator switches, mixture & prop rpm to rich/full…
Set Throttle to full.
Turn on fuel boost pump until flow peaks, then turn off.
Set throttle to 1/2 inch.
Then turn magnetos/start switch to start / both
…

7

Makes no difference. But if you guys are running the beta and no seeing it it must be on my end.

Followup

After 5 hrs of no flying … troubleshooting…It appears that the ornithopter corrupted my controls. Hve since deleted all control schemes except the default and ornithopter controls. Even though I deleted Dune the controls are left behind. My avionics button was on all the time. Deleted the G36