These are actually the higher level lods that haven`t been colour corrected. They are not missing (the tiles are being loaded) just a much different colour than the lower lods
1 Like
Yeah I kind of knew that. Unfortunately fixing it is beyond my capabilities but if I was shown how I would certainly take the time (for the IOM)
Try Manhattan.
I am mistaken. It is a TP Link Gigabit USB Ethernet adaptor so is a good brand. Odd that itās seen as unrecognised?
This: TP-Link USB 3.0 to Gigabit Ethernet Network Adapter, USB to RJ45 Lan Wired Adapter for Ultrabook, Chromebook, Laptop, Desktop, Plug and Play for Nintendo Switch, Windows 10/8.1, and Linux OS(UE306) https://amzn.eu/d/236UoPX
Iām unable to use the PC for a couple of days now (got my son) so will resume the fight mid-week!
Didnāt you mean to reinstall all of Windows too (reformat / start from scratch)? Or just the game? If it pulls my settings from cloud either way, Iāll just be back where I am now wonāt I?
I could get it going this weekend I suppose and yeah with my speed it wonāt take too long. Got my boy this weekend so canāt fly, but Iāll be able to pop in and out to check on it probably.
I use a TP-Link wifi dongle and that a) shows up in device manager and b) is brilliant compared to most Iāve tried. Search for optional updates in Windows or check out TP-Linkās website for firmware.
I expect just the game would work.
@MichaMMA Hey man, I am really sorry to tag you on this but you are really good with this stuff. Iām sorry itās such a long story but do you have any ideas what I can do please? 
After coming back today the situation has got much worse - unplayable now. Last time I flew (a few days ago) I could at least fly normally around lighter areas with smooth 30fps, but now something has totally crippled my PC. I think something on the hardware has died.
I installed Open Hardware Monitor, and looks like my CPU temps are spiking up really high really often. When the game is paused, itās around 70 degrees, but I see each core hitting 93 to 100 during playing, so looks like itās thermal throttling going on, but constantly?
I have not run OHM to check CPU temps before, so not sure if this is normal or not, but for sure whenever I checked the Task Manager CPU graphs, Core 0 was ALWAYS maxxed out. Now it is around 50% and GPU is going up and down also.
Not sure why or how that would affect the low quality PG though. I can hear the fans running but OHW sometimes reports zero RPM even when I can hear it so not sure that is accurate.
At idle on desktop CPU says around 55, but I can see Core 3 and 4 even there going up higher (76 on some cores), and CPU package whatever that is reads up to 84 degrees for a moment!?
I tried another game (one of the only other things installed on this PC, Wreckfest) and Core 1 and 3 are also spiking to 100 degrees even with low āCPU Loadsā.
This only seems to have started since doing the .net update on last Friday though (or total coincidence) - but very strange that itās got so much worse since last time I used the computer.
I checked and there is no dust blocking the fans that I can see. The device does NOT feel hot to the touch either.
Iām desperate to fly and canāt! 
EDIT: Seems this Shell Infrastructure Host is a memory leak in the Photo Viewer app. Rebooted and temps are lower now BUT on desktop it is still reaching 98 degrees. Doesnāt seem right. Fans are not going full speed after reboot though.
Doesnāt look good. As it doesnāt feel hot I suspect your cooler has come loose but if thatās ok then reflash bios and reinstall every mainboard, chipset, cpu driver you can ā¦ no promises.
I dare not open this unit up. Iāll never manage to close it back up again! Itās so dinky. Why would reinstalling those drivers need to be done though! I donāt see how itās connected with temps.
I might call the company (distributor) I bought it off tomorrow but it was over a year ago so they will probably say sod off.
It could be a deep lying driver is corrupt. This can be hard to pin down and a simple reinstall may be the easiest soution.
OK I see - will investigate what I need to do, thanks 
Left it idling on desktop whilst I had dinner and when I opened OHM it was this (with just Chrome open):
But as soon as I do anything (in Chrome, just typing) it goes to this:
Yup that really looks like a cooling issue
I installed this lot over the top (just ran Setup and it went through them all).
It didnāt ask to reboot afterwards but I did. Hasnāt helped the high temps though. Just played a simple 2D game and it still hits these:
Shouldnāt it cut the loads to protect itself and to not get so high? I think that CPU will be dead now, isnāt it?
What about ānight modeā?
Edit
If enabled CPU will run hotter.
Heey. I didnāt turn anything new on. Donāt even know where that Night mode is - in Windows?
This whole situation has just progressively got worse each time I come back to my PC when Iāve had some so called āleisure timeā
Do you think CPU running slower than expected would cause those LOD issues? I suppose it makes sense.
back button and night mode button ? : OneXPlayer (reddit.com)
edit
Turn off virtualization via OS settings.
Probably yes.
CPU temps in C are what most people compare. Anything under 80C is considered quite good for a device of this size. 80-90 is a bit hot, but not unusual. Over 90 is probably too hot, and as you approach 100C the CPU will start to slow down to protect itself from damage. This is called thermal throttling and this is what is indicated if the āCore Thermal Throttleā changes to Yes instead of No.
Source https://onexplayer.fandom.com/wiki/Thermal_Measurements
I donāt see it here:
Followed these steps:
In Control Panel, select Programs and Features. Select Turn Windows features on or off. Expand Hyper-V, expand Hyper-V Platform, and then clear the Hyper-V Hypervisor check box .
EDIT: Oh, itās the Windows Hypervision Platform near bottom? It was off.
Try via BIOS settings and go to their forum or discord because your CPU goes over 99 degrees celsius.
1 Like
I had a look in the BIOS once before and it is not a normal looking one (is their custom one). Very minimal options there, nothing for āPower Usersā 
Iāll have another look but it only had really basic stuff like TDP and Boot Partition / Recovery.
Ah, here:
Iāll try their Support but they are pretty terrible with that - Chinese!
Decrease TPD (power limit) and go to their forum or discord!
https://onexplayerstore.com/community/xenforum
But they fully understand the English language
1 Like