Itt overheat on take off:
( it always would, if your separator is off for t/o and you pin the throttle to the firewall and leave it there)
If you look, you also notice your torque is over 100%. It’s a high performance turbo prop and spools up quickly.
You can do three things:
-Turn the Inertial Seperator “on” and full throttle:
Off after your in stable climb, gear and flaps tucked away. Back off the throttle as required.
-Seperator “off”. Set your throttle to max 90/95% trq for a shorter strip and your heavy.
60 to 80 % wgt/length dependent. There is no reason to take off wide open in normal use.
-Seperator “off” but pinned:
Back off on your throttle before it goes past 100%, but not recommended as you’ll be busy with everything else at this time. Very heavy with a very short runway would really only be the time to use this method…