Thrustmaster TCA Throttles Problem

User Support Hub Hardware & Peripherals
1

Hey guys,

i got a problem with the throttles. I set them up with the tablet in the A32NX. The IDLE, CL, FLEX and TOGA are aligned perfect between the inside of the cockpit and the hardware. But if im pulling it back to CL after takeoff the A32NX says that it is in CLB mode. If im going in to outside view it says it’s in FLEX mode and the aircraft is climbing with FLEX Thrust even though the Hardware is in CLB position, also the throttles inside the cockpit are in CLB position and the PFD shows CLB.

Any guesses whats the problem or am i doing anything wrong?

Thanks for your help.

cheers,

Tim

2

You may need to increase the “range” value slightly on the EFB tablet for each position (especially CLB), so that it’s not quite as sensitive. It may be that one or other of your throttles isn’t quite in the slot (even if it looks like it) because the range is too small/sensitive.

1 Like
3

tried that. didnt help.
It’s weird because the airplane itself says that its in CLB mode. But if i’m start to Climb it goes instantly into FLEX mode even if the levers remain in CLB and the PFD also remains in CLB