I cannot get the g1000 working title v3.6 to work in the Cessna C172. Have not tried it in the Bonanza or Baron yet. Feeling that if it does not work in the C172 I do not have faith of it working in the others.
Asking myself, am I ding something wrong?
Any feedback gladly accepted
Thanks
1 Like
@GreenMink461037 Check out the #Garmin channel in the WT Discord
2 Likes
Also the latest WT G1000 release is v0.3.7
https://www.workingtitle.aero/packages/g1000/
2 Likes
Thatās affirmative. The G1000 ver 3.7 doesnāt seem to work either. Baron or Bonanza. Going to try outing the Community Folder and just experimenting with G1000 V3.7 and G36 improvement mods
Iām flying 0.3.7 in the Skyhawk as I type. There is a known conflict between the GX and the G1000 if you also have the former installed; WT issued a hotfix last night in the same round that 0.3.7 came out. GX Dev 8 resolves that.
I was having a problem last night in the C172 with the WT G1000. I figured out it was the GX mod that I installed along with the other WT updates. I removed the WT GX from the community folder and there was much happiness.
I try and add the new GX patch later and see if that works.
Fly on!
So with 0.3.7 and GX Dev 8 in the Community folder, there is no conflict? Iāve not seen any āhotfixā from the WT websiteā¦ I know the G1000 has lost some functionality (ENGINE,LEAN,SYSTEM) as it currently stands. I may be missing a patchā¦
TIA!
1 Like
Thanks, I am on the Discord. Thatās why I am confused, I guess. I have G1000 3.7 and GX dev8 residing in the Community folder and I got the impression there was conflict between the twoā¦??
I just flew the Skyhawk, I donāt know what conflict there might be. I use Dev 8 for the CubCrafters and GotGravel Vertigo. Have you reported what youāre seeing to Matt et al.?
1 Like
No, not yet. Iām truing to see if I can isolate the problem further. Flying the Bonanza as we speak (LOL, text) and my Manifold Pressure is No A Number (NAN) and the previous option for ENGINE, LEAN, SYSTEM is not present. Everything else seems to be OK. All I have in the Comm Folder is the G1000 3.7 and the z-bonanza G36 Improvement Project folders. Havenāt CTDād or froze yet and Iām 25 minutes into the flight, which is a good thingā¦
1 Like
Have you checked with the Bonanza mod author? Iām guessing this is TheFrett version?
1 Like
3 Likes
Affirmative, the Frett version. I thought Matt (Matto) was the author. I just downloaded the Improvement Project v0.62 from Github, not sure which G36 mod I have installed in Comm Folder.
1 Like
Iām on the team, it was a real collaborative group.
Iām looking after the mod whilst @FrettFS is busy IRL. There is another comment on our improvement mod post with potentially the same issue.
Iām away from my MSFS machine at the moment, Iām going to try and install FS on my laptop and see if I can recreate.
2 Likes
At your leisure, my world will not collapse around me with no G36 Improvement mod, LOL!
1 Like
Busy IRL but following the developments whenever I can and even some flying lately 
I have seen no problem with the latest 0.3.7 version of the G1000 mod along with version 0.62 of our G36 mod. Buses tied is there as well as other indicators of a properly working mod, such as alternator and battery load indications.
Note I just updated the link in the G36 mod OP to 0.3.7 of the G1000 mod from 0.3.6. The latter version was short-lived due to some merge mistake on WTās part from what I understood. I had problems with that version tooā¦
3 Likes
I have an oddity in using the G36 mod and the WT G1000 mod together. When I use both, all the aeronautical info on the MFD display āstuttersā. With glass cockpit refresh rate set at medium, as I am flying, the moving map scrolls normally but the aviation displays (airports, zone borders etc.) move remain static and ājumpsā to the correct position every 3 seconds. I have tried it with High refresh rate and it still sticks but now for one second at a time.
On their own, neither mod causes this, it is ONLY if I use both together. In other words, stock game aircraft, stock G1000: no problem. Using G36 mod OR G1000 mod: no problem. Using BOTH G36 AND G1000 causes the issue.
A short video showing the issue:
1 Like
I notice you also no longer have the Engine-Lean-System selection on the leftmost lower row of buttonsā¦ Although, your Manifold Pressure is showing a value (which mine isnāt)
I made that clip some time ago so that could have been in an unusual state. I just did another brief run with all current (G36 mod v0.62 and WT G1000 V3.7): this does have leaning so no issues there. It is just the āhesitationā in aviation symbols that is odd.
1 Like