Using the template below will greatly help the team reproduce the issue and ease the process of fixing it. Before posting, search for an existing report. If you are not sure it’s a bug, please first report in User Support Hub . 3 tags are required - add them in the tag section next to the title abov…

It’s weird that’s it’s only at idle for you. For me, it’s definitely around the 20-30% mark, making landing very hard unless you feather which you shouldn’t have to.

Same issue for me. Was a bit confused at first since this is my first flight sim but after reasearching the 208B I realised this definitely is a bug. As you noticed this is unrelated to airspeed so it makes no sense at all.

Thank you, a lot of people in the other thread say it’s the windmill effect or the throttle going into Beta. This issue is neither of those things.

After researching how exactly these constant speed props work, I have some extra thoughts and maybe some advice for other new players like me struggling with the 208B (Maybe not entirely correct, as stated before, I’m new to this): When reducing the throttle to idle it is generaly correct, that th…

That’s pretty much what I do for now. I find the threshold in the throttle just before the prop goes nuts. It still comes in hot though. Gonna switch to something else I guess till it’s fixed. Which sucks because I really the 208B.

[image] Caravan 208B - lowering throttle, propellor goes crazy Aircraft & Systems I have two screenshots of my caravan descending at 1,000fpm. Here the throttle is in flight idle, with my physical throttle being slightly above its max bottom position: [Screenshot 2024-1…

I’m saving for the Pilatus currently for the same reason. when flying 208 though, I switched my procedures to just RPM redlining the prop anyways. Often times 90 kts is too fast and feathering the prop is too permanent (takes quite a long time to get it spinning again). So redlining it is the last …

Yes, I’m aware of the behavior of the plane being entirely unrealistic and illogical. I’m just attempting to provide possible workarounds. Simply because I had several failed landings with the 208 (which are quite nerve wracking after flying a 3:30 Hr medevac carreer mission). So I’m testing around…

From what I can make out the bug is that with the way most people have configured their throttles reducing the physical throttle to its minimum value puts the virtual throttle into beta range. There is a further throttle bug where it is not possible to configure the range of physical throttle to in…

Indeed, there are two possible ways to bind the throttle axis, one with 0-100 and the other without the percentages. People for whom this issue is bad, could you try binding to the other one and see if it gets better?

Cessna 208B Prop Speed at Idle

Bug Reporting Hub Aircraft & Systems

PirateAntz December 5, 2024, 9:16am 8

Also note how during spinout event the torque has a negative value.