Release Notes - Microsoft Flight Simulator 2024 Sim Update 2 [1.4.20.0] Available Now

AeroElvira Optica

  • Got Friends fixed AeroElvira Optica with version 0.0.9
    • Reverted to Original Fuel System (Fixed in SU_01)
    • Fixed Spawning with Elevator Trim Full Forward
    • Removed Heat Blur VR Check (Right Eye Fixed in SU_01)
    • Reverted Avionics Brightness (Avionics Fixed in SU_01)
    • Fixed Exterior Registration Color and Added Dynamic Support
    • Fixed Headphone Mode not Allowing for Aircraft Exit/Entrance
    • Added Additional Thumbnails for Career Mode and Configure Menu
    • Synced Mandatory Exterior Coding Updates with Interior Updates Section
    • Fixed Ability to Load/Offload Co-Pilot from the EFB Seat Selection"
    • Temporarily Removed Heat Blur Effects while in VR
    • Fully Upgraded to Modern Fuel System to Fix Career Refueling Issues
    • Modified First Aid Kit Artwork
    • Added New Thumbnails to Account for First Aid Kit Artwork Changes

Air Tractor AT-802

  • Fixed animation rudder trim wheel
  • Fixed checklist eyes icon for gear front on wheels variation
  • Fixed an issue on the AT802 that prevented the starter switch from being operated while the engine is running.
  • Added conditon speed to trigger vortex effect on cropdusting trail
  • Fixed an issue that causes the AT802 to spawn without fuel when started in Freeflight in parking.
  • Fixed an issue on the AT802 Preventing the Emergency Dump Trapdoor from animating properly
  • Fixed Avionics switch not turning off ATC connection to COM NAV channels
  • Fixed GTR225 & GNS430 to no longer modify the same com index
  • Fixed AT802 wear and tear brake sound when brakes were damaged and played no sound
  • Fixed AT802 Trim Indicator
  • Fixed an issue on the AT802 causing the spray pump not to be animated.
  • Fixed liquid tank value set from the EFB being overwritten when launching a flight.
  • MVP 50 now connected on the main bus instead of the avionics bus
  • Fixed Ground Light display on Agricultural version
  • Improve front wheel lods visual
  • Fixed tire spinning on wheels variation
  • Added Registration Number in Cockpit
  • Fixed hour meter instrument
  • Fixed animation of floats landing gear
  • Fixed windshield material
  • Improved glass material in cockpit
  • Fixed Eye checklist on landing gear front left
  • Fixed custom color on aerial app variation
  • Adding heading indicator instrument in firefighting and agricultural cockpit
  • Fixed glasscockpit being always off when starting in cold & dark.

Airbus 400M Atlas

  • iniBuilds fixed Airbus A400M with version 0.0.19.
    • Rudder controls tiller is OFF by default, blocking career
    • MCDU Does Not Reflect Fuel Input from EFB, Unable to Enter Fuel Values Manually
    • GPU does not appear when toggled on the EFB in Ground Menu and in Panel State Menu
    • “Unexpected Error” is triggered when arriving in game, forcing playing to go back to main menu
    • Engines not responsive when OAT below 0 degrees C

Airbus A310-300

  • iniBuilds fixed Airbus A310-300 with version 0.0.17
    • On an ILS approach, LOC* is displayed on FMA after the localizer has been intercepted and on glideslope. FMA should change from LOC* to LOC
    • In career mode, passengers have loaded 100% but the sim says the load percentage is at 0%
    • Checklist is not included in the Drop Down EFB but is included in the cockpit EFB
    • Aircraft Over Gs on RTC screen in career and other ““skip”” related state issues prevent career use properly
    • Cannot scroll through approach/departure pages to select approaches on the CDU
    • Passengers seat found = 0
    • Flight model seem odds
    • Exit flight, game crashed
    • Very long loading time (more than 3 min)
    • APU is already on when spawning cold and dark
    • Wheels are passing through the ground
    • Ext power is not working 100% sometimes, you have to restart in order to have it available
    • Flaps infos not updated on external HUD
    • Missing Preflight interactions for Covers and Chocks
    • Aircraft froze or crash when finishing up loading in an airport in Xbox Series S

Airbus A321

  • iniBuilds fixed Airbus A321 with version 0.0.19
    • Aircraft Engine is way quieter based on Turbofans loudness unit when full throttle on the ground in both perspectives
    • There is a gap in the aircraft
    • EFB breaks the plane when syncing to FMS
    • Loading A321R resulting in crash after starting Free Flight in Xbox Series S
    • Communication (batteries) are OFF
    • Front wheel is locked
    • GPU is connected and move with the pushback. -No working avionics (18/11/2024 avionics are available)
    • No pin in preflight
    • Some checklist cameras are completely off
    • Some tooltip states missing
    • No interaction volume on covers + chocks
    • Bad tires highlights
    • No interactions on flaps
    • No multiple highlights on flaps
    • No multiple highlights on elevator
    • Interactions on aileron don’t work
    • Bad pin placement on elevator
    • Rudder controls tiller is OFF by default. The option is in Inibuilds EFB
    • No clickspot to exit the plane
    • TCAS not operative

Airbus A330-300

  • iniBuilds fixed Airbus A330 with version 0.0.19.
    • Engine audio is quieter and does not meet Turbofan/Jet standard LU unit in both perspectives
    • Airbus A330-2 Instrument Views Not Functioning Correctly
    • Aircraft Over Gs on RTC screen in career and other ““skip”” related state issues prevent career use properly
    • Avatar spawn nodes in the wrong place
    • Audio can be heard despite volume faders set to zero inside cockpit
    • No interaction volume on covers + chocks
    • No pins on tires + flaps
    • Only two tires are good for interactions
    • No multiple highlights on flaps
    • No aileron interaction in preflight
    • No multiple highlights on elevator
    • All checklist cameras are offset
    • Entrance doors are not interactive
    • Frozen at spawn with avionics off and fuel at 0%
    • Startup shortcut (RB + Dpad Down) doesn’t seem to work
    • Parking brakes not set when loading Taxi.FLT
    • TCAS inop Fixed - Using Skip To Descent causes aircraft to change configuration and autopilot settings rapidly
    • Navigation Lights are dim and light disappears as zoom is moved outward
    • Xbox users often crash when loading into large airports in the Simulator || Memory_Z::OnOutOfMem

Airbus A330-743L Beluga XL

  • iniBuilds fixed Airbus A330-743 Beluga XL with version 0.0.19.
    • EN-US and DE-DE AC description is missing
    • Cannot scroll through approach/departure pages to select approaches on the CDU
    • Crewmember is clipping through floor of the cargohold
    • Player receives Aviator performance penalty ““G force exceeded”” during career mode RTC
    • Over G/Overspeed warning when skpping in career
    • No nosewheel steering (forced on by default)
    • Rudder controls tiller is OFF by default. The option is in iniBuilds’ EFB
    • Bad pin placement on elevator
    • No multiple highlights on elevator
    • Bade pin placement on flaps
    • No multiple highlights on flaps
    • Only two tires are good for interactions
    • Bad tires highlights
    • No aircraft tile in briefing + no covers in preflight state
    • During the briefing screen, the plane is in motion when it should be apron at its parking slot
    • Startup shortcut (RB + Dpad Down) doesn’t seem to work

Airbus Helicopters H125

  • Fixed the fuel consumption.
  • Added DH tooltip to radar altimeter
  • Added inop to trim release tooltip
  • Added outer knob cusor control tooltip and inop tag
  • Added check GOV OFF
  • Fixed alternator light not lit when the related breaker is pulled
  • Fixed PFD screen not being bright enough in low light situations.
  • Fixed alternator producing too much tension too quickly when engaging the starter.
  • Added Dirts for Aerial App Variation
  • Corrected some LOD transitions for FlightSeeing_Static_01 / FlightSeeing_Static_03 / FlightSeeing_Static_05 Liveries
  • Improved some tooltips
  • Added dirt LODs
  • Improved lumisosity off intrument at night
  • Changed Airspeed Indicator
  • Fixed slight variation in variometer values between visual and HUD
  • Improved visual on Dust Dirt
  • Fixed cropped stopwatch dial
  • Added new interaction to stopwatch knob
  • Tuned the Main rotor and Tail rotor to fix the NR in autorotation (engine OFF, NR will now increase and require collective input to maintain 410 NR at 60 KIAS), the glide ratio in autorotation (0.54 NM/1000ft at 60 KIAS 410 NR), the pitch control to Vne, the retreating blade stall above Vne, the max cruising speed and the ground handling with tail rotor input on grass surface.

Airship Industries Skyship 600

  • Fixed tootip door to exit
  • Added icing to the interior cabin windows
  • Inverted direction of interactions on dampers levers
  • Ammeter is now functional and behaves according to its knob
  • Added DC screen
  • Set tilt to zero in cruise
  • Replaced ComNav panel by transponder
  • Made GNS430 work when starting in cold and dark
  • Fixed Generator warning lights
  • Fixed Oil Pressure warning lights
  • Reduced the fuel flow scalar to match the expected range and fuel consumption.
  • Fixed interior minor lod issue
  • Fixed standing passenger
  • Adjust engine efficiency to match power at max rpm (255 hp at 5200rpm) and max continuous (230 hp at 4800 rpm).
    • Adjust drag to match the expected maximum airspeed.
    • Adjust MOI on pitch and yaw for better controllability.
  • Fixed exterior parts LOD Issue
  • Fixed icing visual into cabin
  • Added “Auto” position to ballonet fan switches
  • Fixed visual of barometer glass
  • Improved airship system simulation, and Skyship initial states to avoid chaotic behavior.

Amphibian Aerospace Albatross G111 / HU-16 / G111T

  • Mike Johnson fixed Amphibian Aerospace Albatross G111 / HU-16 / G111T with version 2.10.
    • GPS and Avionics emissive values fixed (req. due to SU1 scene brightness/exposure changes)
    • Windshield edging flickering fixed
    • Insects removed from fuselage side glass
    • HU-16 cockpit label fixes
    • Royal Canadian Air Force Livery (historical) added
    • Workaround for major rendering issue with windshield refraction coming in SU_01 (basically unflyable without a fix)
    • Windshield texture improvements
    • Smoother oil cooler flap and cowl flap animations

Archer Midnight

  • FlightFX fixed Archer Midnight with version 1.3.5.
    • The camera’s position determines whether the aircraft is turned on when the AIRCRAFT MODE is set to OFF
    • Character is not facing the plane at spawn
    • Incorrect Navigation Graph
    • Problem with electric engine simvar not set on startup (Circuit Electric Engine On)
    • Missing files: Taxi.flt, descent.flt, and final.flt
    • Battery is not at 100% at start
    • Engine 2 and 3 have 0% Wear & Tear at startup
    • Motors get destroyed by wear and tear very fast
    • On the runway, by default, in “ground mode” (hard to know how to take off)
    • Propeller animation doesn’t update as fast as it should

Aviat Pitts Special S1S

  • iniBuilds fixed Aviat Pitts Special S1S with version 0.0.10
    • Visual helper is not working for a few checks
    • Some checklist items are not translated
    • Interactables/buttons/levers do not produce sound when moved/interacted with
    • Multiple Aircraft Buttons and switches do not have SFX when interacted with
    • Aircraft has no ground and water effects
    • Oil Gauge extends without the Oil Cap opening
    • Specific covers will not be covered by the mission flow
    • Skipping to taxi doesn’t remove engine covers
    • Character is not facing the plane at spawn
    • Aviator performance that contains debug text because stalling speed is not set in the aircraft CFG files
    • Missing highlights preflight
    • No level of detail in the checklist
    • Cannot take of no enough power
    • Elevator no highlight
    • Interactive volumes
    • Unrealistic, roll rate too low, too much yaw instability

Beechcraft Baron G58

  • iniBuilds fixed Beechcraft Baron G58 with version 0.0.10
    • Unable to Load Co-Pilot
    • Most buttons and switches don’t have SFX
    • Multiple knobs and switches lack audio
    • Cowl flap not animating
    • Prop feathering not animated correctly
    • Registration livery colors
    • Tail number does not show up on the external view
    • Engine exhausts lack heat animation
    • Multiple issues with tooltips
    • Navigation, strobe and wing lightbulbs are too dim
    • Camera is in the aircraft during the rtc because of the RTC nodes position
    • Simvar “Flaps current speed limitation” incorrectly set
    • Aircraft will move after turning on the engines even with parking brakes set
    • Covers are not removed when loading the Taxi.flt
    • No collision on wings
    • Prop synch inop

Beechcraft Bonanza G36

  • iniBuilds fixed Beechcraft Bonanza G36 with version 0.0.10
    • Adjustment to enable better career compatibility

Beechcraft C90 GTX King Air

  • Carenado fixed Beechcraft C90 GTX King Air with version 1.0.9
    • EFB route does not transfer to avionics
    • Unable to hear another Player’s Aircraft Engine in Multiplayer
    • Unable to hear audio identification of Navaid (ILS/VOR) despite the volume selected at 100%
    • There is no Tooltip on Circuit Breakers located on the Circuit Breakers Panel and on the Buttons located on MCDU panel
    • AUTO START ENGINE do not work properly
    • King Air GTx is not available for Passenger Carrying in Career. Only VIP and Medical Evacuation
    • There’s an incorrect input indicator on Pitchtrim while using a controller
    • In career mode skip function for a medevac mission, checklist items are not completed prior to takeoff
    • EFB Landing Performance Data will not calculate for destination when in flight with approach speeds or METAR
    • EFB performance data does not calculate takeoff or landing data
    • Circuit Breakers on Pilot and Copilot side have no function and do not impact any systems in the aircraft
    • Few untranslated items in Polish, Italian, Norwegian and Russian languages
    • Before Starting Checklist Electrical System Check calls for needle in green arc, but no green arc on gauge
    • Inaccurate translations in Polish language
    • Control Display Unit (CDU-3000) does not automatically initialize with FMS position using skip function in career mode
    • Career Mode ATC files the Med Evac mission at FL450. FL450 is a mission task. Max altitude for the C90GTx is FL300
    • EFB passenger and fuel quantity change between hangar EFB performance planning and Ready to Fly EFB performance planning
    • Medical Variant passengers are not seated properly
    • Chosen livery is not visible to others in multiplayer
    • Vehicle (ambulance) graphics merge with hangar during Med Evac mission
    • Aircraft disappears at certain distance

Beechcraft KingAir 350i

  • iniBuilds fixed Beechcraft KingAir 350i with version 0.0.7.
    • Forward storage compartment doors come off revealing forward storage compartment doors
    • Landing gear can retract while plane is on the ground
    • Unable to set approach procedures for flight plans
    • Center console buttons are all INOP
    • No clear way to back out of Waypoint information screen
    • Cannot load or activate any procedures into flight plan

Bell 407

  • iniBuilds fixed Bell 407 with version 0.3.14
    • Some of text and labels are either unreadable or in low resolution
    • Autostart does not function properly and engine quits
    • LOD Issues on Resume/Main Menu Screen
    • Some knobs lack turning animation

Boeing 737 MAX 8

  • Control surfaces are heavier when facing hydraulic failure
  • Fixed Heat engines FX issue
  • Fix altitude warning playing in cold & dark
  • Modified radio knob tooltips to show the current standby frequency
  • Fixed the name of the Sun Express livery in the aircraft selection
  • Fixed flight and landing altitude knob animations
  • Fix pilot camera position
  • Fixed altitude knob animation
  • Added automatic lighting adjustment on spawn to better match the ambient lighting
  • Fixed overhead and pedestal screens that were incorectly tied to their section light potentiometer
  • Adjusted automatic brightness curve for some screens that were hardly readable under some weather/light conditions
  • Fixed XPDR not receiving inputs
  • Added Livery SunExpress
  • Debugged Livery Korean Air
  • Debugged Commercial Static 03
  • Fixed GPU not turning on plane when battery is off
  • Fixed avionics fans sound playing at the wrong time
  • Fixed an issue on the 737 that prevented its deice system to work properly
  • Fixed screens and some avionics powering on when they shouldn’t in cold & dark
  • Updated hydraulic system configuration and FLTs to fix low hydraulic fluid readings.
  • Fixed Transponder button wrong animation
  • Fixed missing visual indicator on MFD/EFIS knobs
  • Added FX to simulate snow blowed by engines when reversed
  • Fixed an issue where the engines would not start in cold conditions.
  • Adjusted step climb logic on the CDU VNAV cruise page to more closely match real-world behavior.
  • Updated the background and text colors of the com radios, nav radios, adf radios, and mcp windows to match real-world look and feel
  • Fixed issue to verify the active Nav frequencies in the radios when the aircraft loads are set to the correct NavMode (ILS or VOR)
  • Fixed external light doesn’t work on BBJ variation
  • Fixed AFDS flood light doesnt work in cockpit
  • Fixed landing gear lever glass shader issue
  • Fixed several issue on different liveries
  • Fixed some issue on 3d model
  • Improve visual of the BBJ cabin
  • Fixed alternators not being usable after activating the GPU
  • Implemented 737-specific climb and descent SPEED RESTR field logic.
  • Fixed rough autopilot altitude capturing.
  • Added automatic loading of airport transition altitude and level.
  • Fixed an issue where an inactive route had to be executed twice, and some data was lost.
  • Enhanced the Bowed Rotor Motoring logic during engine startup.
  • Adjust erroneous warnings on engine indications during engine start up.
  • Correct turn radius on ND for approach and missed approach legs.
  • Fixed Left ADF mode knob

Boeing 747-400 LCF Dreamlifter

  • Working Title fixed Boeing 747-400 LCF Dreamlifter with version 2.0.16.
    • Added realistic spool up times when setting takeoff thrust
    • Removed engine and pitot covers for preflight walkaround
    • Added aircraft configurations to flight performance files
    • Fixed an issue where the active COM frequency was not appropriately set when spawning into a flight on the runway
    • Added alternate gear extension
    • Added engine/vortex ground fx
    • Fixed AP disconnect bar animation
    • Fixed excessive turn radius on ND for approach and missed approach legs
    • Added automatic loading of airport transition altitude and level
    • Implemented updated simulation of aircraft hydraulics, including wear and tear and allowing for partial or full systems to be disable
    • Fixed autostart (CTRL+E) not starting engines
    • Takeoff pre-pressurization only happens if the engines are running and bleed air is available now
    • Now targeting +0.1 psid cabin pressure differential during takeoff
    • Added LDG ALT flag on PFD and improved landing altitude logic
    • Fixed ident page navigation database dates
    • Fixed CLB derate logic to be in accordance with the FCOM
    • Fixed VNAV path overshoot at T/D when descent speed is equal to or slightly lower than the cruise speed
    • Fixed rough autopilot altitude capturing
    • Fixed EFB performance data distance calculations

Boeing 747-8 Intercontinental

  • iniBuilds fixed Boeing 747-8 Intercontinental with version 2.0.7
    • Labels can be seen strobing when looking at the Cabinets behind the Copilot and Passenger seats of the Boeing 747-8I
    • Cursor control does not work so there is no way to interact with Lower MFD/EICAS or complete checklist items
    • Engine fan blade spin is missing
    • Speed brake handle click spot is too big and makes interacting with the CDU too difficult especially for CLR
    • Reverse thrust clickspot is almost impossible to click and even when clicked it cannot be moved
    • Engine 3 and 4 animate for the wrong engine. (starting engine 4 animates engine 3 and vise versa
    • Captain CDU does not power on with Standby power switch on/auto state
    • Turning battery on does not properly power the electric buses
    • On Indication missing or too faint to see on various overhead panel button/switches (especially External power)
    • Missing exterior interactions

Boeing 787-10 Dreamliner

  • Working Title fixed Boeing 787-10 Dreamliner with version 2.016
    • Added realistic spool up times when setting takeoff thrust.
    • Updated hydraulic system to 2024 hydraulic system for improved non-normal operations (systems now control individual actuators as would be expected) and higher -quality wear and tear simulations
    • Removed engine and pitot covers for preflight walkaround
    • Added aircraft configurations to flight performance files
    • Fixed an issue where the active COM frequency was not appropriately set when spawning into a flight on the runway
    • Added engine/vortex ground FX
    • Fixed avionics not loading
    • Fixed rudder not moving linearly
    • Fixed AP disconnect bar animation
    • Fixed inverted emergency lights switch
    • The altitude selector now stops at the selected BARO minima when in the AUTO position
    • Correct turn radius on ND for approach and missed approach legs
    • Fixed an issue where an inactive route had to be executed twice, and some data was lost
    • Added automatic loading of airport transition altitude and level
    • Takeoff pre-pressurization only happens if the engines are running and bleed air is available now
    • Now targeting +0.1 psid cabin pressure differential during takeoff
    • Fixed excessive turn radius for approach and missed approach legs
    • Added LDG ALT flag on PFD and improved landing altitude logic
    • Fixed ident page navigation database dates
    • CLB 1 and CLB 2 derate modes now revert to CLB when the derate fades out at high altitude
    • Fixed VNAV path overshoot at T/D when descent speed is equal to or slightly lower than the cruise speed
    • Fixed inverted tooltip values on emergency lights switch
    • Fixed rough autopilot altitude capturing
    • Disabled FD door access knob since no animation currently exists for it
    • Fixed inverted mouse scroll wheel interaction on emergency lights switch
    • Fixed EFB performance data distance calculations
    • Fixed interior of cargo doors not being animated
    • Fixed rudder pedals not animating correctly
    • Fixed the in-sim checklists to include everything in the CDU checklists

Boeing C-17 Globemaster III

  • MilTech fixed Boeing C-17 Globemaster III with version 1.0.5
    • Contrast and weathering on all liveries, improved throughout
    • Main Landing Gear sinking on the ground on heavy loads
    • Added additional weathering to cockpit textures
    • Rivets white outline when viewed from afar
    • Improved Engine Cowling texture
    • Primer Livery registration incorrect
    • Ground Spoiler ARM Knob, corrected the Tooltips
    • Increased resolution on Tablet EFB Textures
    • Maximum fuel load in Lbs displaying incorrectly due to wrong fuel type on Flight Model
    • When spawning on the runway, stab trim is configured for takeoff
    • ATC designation fixed
    • Incorrect naming order in aircraft resolved (manufacturer name missing)
    • COMM/SKE Tooltips corrected
    • Issues on the engine geometry
    • Other minor tooltip edits
    • ATC Callsigns overwritten for some liveries
    • Stab Trim alarm adjusted
    • RA/BA was inverted on the HUDs
    • Course variables completely disconnected from varios Navigation Display screens
    • ETA to destination at low speeds calculation improved
    • Transponder on ND now displaying correctly mode
    • Overspeed alarm triggering at 250kts under 8000ft
    • Yaw damper not engaging with autopilot when using keybinds/hardware binds
    • Aircraft nose disappearing on Walkaround mode
    • Various LOD issues
    • Engine blast effects detached fixed
    • Multilanguage LOC Translations added
    • Added “Documentation” page to EFB, with links direct to the Aircraft Manual
    • Walkaround items improved - Engine Covers can now be removed from walkaround, added tire pressure checks. Added preflight walkaround to Checklist
    • Additional conditions for a successful engine start added - Engines will fail to start if PRI or SEC Hyd Pumps are on, fail to start if APU Bleed is off
    • APU can be started without fuel pumps (gravity feed), but will be fuel deprived after two minutes if boost pumps are off
    • Engine Ignition will auto-switch off when N2 greater than 52%
    • Added APU to allow feeding from Fuel manifold
    • Fuel transfer among tanks is now possible using the FILL and XFER valves/pumps
    • Engine crossfeed is now possible. NOTE: Crossfeeding and fuel transfer is not possible at the same time
    • Fuel Dump is now possible
    • Cargo Bay flag temporarily disabled, being moved and reanimated

Boeing CH-47D Chinook

  • Blackbird fixed Boeing CH-47D Chinook with version 1.0.1
    • Fixes to various tooltips on circuit breaker panel, ics panel, and fuel panel
    • Fixed animation on radar altimeter high limit knobs
    • Fixed highlights for external interactions
    • Fixed pins for external interactions
    • Adjusted checklist for external preflight
    • Changed interaction direction for wiper knob
    • Changed tooltips for starter selector switch
    • Moved cockpit windows to external model to fix reflections
    • Adjusted bottom position of external ramp
    • Added engine and inlet covers
    • Fixed auto-shutdown scripted behavior
    • Fixed fuel qty total display
    • Added text localizations

Boeing F/A-18E

  • Improved some tooltips
  • Added fuel probe extension cockpit controls (removed exterior preflight interaction)
  • Fixed position and formation light not working on cruise departure
  • Removed some leftover circuits slightly extending battery lifetime without generator supporting it
  • Improved low altitude water FX visual with vortice effect
  • Fixed an issue with right gear pin interaction collision box
  • Added new vapour cone FX
  • Improved the interactions and tooltips on the Air-to-Air Weapon Selection and Sensor Control
  • Increased the Fly By Wire high speed roll rate scalar to fix roll rate at mach 0.9 (550 kt).
  • Increased some preflight interaction volumes
  • Fixed an issue that could cause the F18’s engine not to restart properly after a back on track in one of the training
  • Added Bleed air knob position indicator
  • Fixed wing light orb floating when wings are stowed
  • Fixed missing part in front landing gear

Cessna 152 Aerobat

  • iniBuilds fixed Cessna 152 Aerobat with version 0.0.9
    • Ferry Flight (FEF-PLN), Flightseeing (TOR-PLN) and Aerial Advertising (AAD-PLN) missing chock = 1 in flt file
    • Debug text present in checklist
    • Look at arrow points toward unknown object during starting engine portion of preflight
    • ADF frequency cannot be set
    • Rear position light projection is not aligned with light bulb on plane’s rudder
    • Takeoff Landing distance does not generate in EFB
    • Pilot navigation graph positions
    • Passenger navigation grpah RTC positions
    • Ground handling flight model
    • Door entry/exit logic for career mode compatibility

Cessna 172 Skyhawk

  • Fixed the adaptive liveries
  • Fixed the livery Flight Seeing Adaptive 05
  • Improved the livery availability per variations
  • Fixed “From” animation
  • Adjust FLT potentiometer values to improve night spawn visibility
  • Added missing text entries for the EFB for the skydiving variation

Cessna 172 Skyhawk (G1000)

  • Added runway dirt
  • Fixed rain direction & scale on all exterior
  • Fixed floats variation gear lights turned on in cold and dark departure
  • Improved interior rain tilling
  • Fixed camera bug in checklist, engine startup page
  • Added leaks dirt
  • Fixed AO for floats variations
  • Fixed tour and skydive liveries adaptivity
  • Fixed company names and base lines for all cargo liveries
  • Improved variants thumbnails
  • Changed altimeter instrument in all variations
  • Fixed the engine friction to correct the propeller behavior when stopping the engine, even in case of in-flight engine failure.
  • Fixed behavior of lighting knobs on the C172 G1000 which in VR used both horizontal movement and rotation to increment/decrement while other knobs only consider rotation.
  • Fixed visual on Flight Seeing 07 & 04 liveries
  • Improved adaptivity of all liveries
  • Fixed floats front wheels suspension animation
  • Fixed visual issue on rudder for livery Cargo 05
  • Adjusted TUTO lines position and default cockpit camera

Cessna 188 AGtruck

  • Carenado fixed Cessna 188 AGtruck with version 1.0.7
    • The Aircraft is missing Agricultural features that are required for career mode
    • Stick cannot be grabbed by vr controllers
    • Minor discrepancy with manual in Before takeoff checklist
    • Turn coordinator lags after initial input is made by pilot
    • Is not available for purchase in career mode new or used

Cessna 208 B Grand Caravan Ex

  • Fixed inverted light knob for pilot and copilot
  • Fixed an issue causing the 208B’s G1000 to be affected by Standby Altimeter Baro Setting
  • Added new cabin for scientific observation variation
  • Added new Observation_Device_04 in (Sim Attachment)
  • Improved Observation_Device_01 visual
  • Improved wings texture for latest lods
  • Fixed the lightbulb on the flood lights to glow when turned on
  • Fixed the Autopilot to better track roll and pitch.
  • Added parts to airframe for scientific observation variation
  • Improved normal maps visual on airframe.
  • Added seatbelt in the cabin for passengers variation
  • Fixed Dirt issue
  • Fixed visual issue on Medic_Ventilator (Sim Attachment)
  • Fixed Nav Lights which were not functional
  • Improved variations thumbnails
  • Fixed color shemes on Cargo & Medevac livery
  • Adjusted autopilot PID’s to fix Dutch roll motion when on autopilot.
  • Improved the Floats landing gear visual reworked more accurately.
  • Removed duplicated remove before flight ribbons
  • Added detail map on cockpit
  • Added a G1000 version without HDG knob
  • Improved visual of the airframe textures
  • Fixed holes in windshield frame geometry
  • Improved seatbelts position with Pilot and Copilot
  • Improved panel screws visual
  • Fixed front landing gear visual issue
  • Improved airframe visual on the latest lods
  • Fixed interaction for Skydive door control and indicators lights
  • Fixed VR interaction on cockpit panels
  • Fixed VR Yoke handling
  • Added Thermal Camera to scientific variation.
  • Improved Thermal Camera visual (Sim Attachment)
  • Fixed preflight engine flame placement
  • Added new parts for the floats variation (tail, exhaust, rear door stair)

Cessna 400 Corvalis TT

  • Carenado fixed Cessna 400 Corvalis TT with version 1.0.7
    • Missing careers (TORPLN, FIFPLN) added
    • Props do not change angles when feathering
    • LOD Popping on Cessna C400 Corvalis TT Instrument Panel
    • Pitot Heat does not accelerate de-icing of pitot tube
    • Unable to naturally pick up icing
    • Takeoff and Landing performance does not load properly
    • No mention of increasing throttle before doing a magneto check in checklist
    • Shutdown checklist missing checks
    • Before Takeoff checklist missing checks
    • Missing after start checklist
    • Missing hot engine start checklist
    • Only one fuel cap can be interacted with
    • Missing interior preflight checklist
    • Passengers can be seen walking next to the aircraft while completing the VIP Private Charter #FCW2212 - Pskov - Flight Closing mission
    • Some dials on the G1000 are missing audio
    • Aircraft has difficulty accelerating beyond white arc
    • Z-fighting on the Battery Switches
    • Spawning the plane in a dense area like KJFK or EGLL causes title to crash XBOX with Lockhart profiling
    • Missing Takeoff checklists
    • Aircraft can exceed service ceiling

Cessna 404 Titan

  • Carenado fixed Cessna 404 Titan with version 1.0.7
    • Engine’s SFX intensity does not change when Cockpit’s door is opened
    • A few interactive objects lack SFX
    • Sun Visor and Passengers’ door lack SFX
    • Some interactive objects lack SFX
    • Medical transport variant passengers are not properly seated/positioned
    • Opening windows does not affect audio from outside the aircraft
    • Heat blur is unnatural
    • Garmin’s Volume knobs are mislabeled on the model
    • Circuit Breakers and Gyroscope arrest do not have Tooltips
    • Rheostats are mistyped as Rehostats
    • Release the Parking Break is not mentioned in the Checklist
    • Leading edges of horizontal stabilizer do not de-ice
    • ADF and Radio knobs are mislabeled on the model
    • Altimeter LOD: Altimeter reads 0 at beyond a specific zoom: LOD
    • Rain streaks behave unnaturally
    • Out of place white texture present on tail number on some liveries
    • Aircraft disappears at a certain distance
    • Elevator trim animation is reversed
    • Aircraft has no water wake effect
    • Identify system is behaving unnaturally
    • VR Incompatible Controllers Message when switching display to VR Headset
    • Medical transport character model rigs render at LOD 2 while viewing them with the cockpit camera
    • Brakes still work at lowest possible Wear&Tear value
    • Right fuel gage shows no fuel burn after 10 minutes at full throttle
    • Service Ceiling is too low for both configurations

Cessna 408 SkyCourier

  • Carenado fixed Cessna 408 SkyCourier with version 1.0.7
    • Update WT G1000 v2
    • Aircraft has no water wake effect
    • Exhaust heat effect can be spawned inside the aircraft
    • Camera does not pan to some interactables when using the Visual Helper in the checklist
    • VS works in reverse direction as labeled
    • Aural Warning Test engages when spawning Cold and Dark
    • Yoke Tooltip is missing
    • Sun Visor Tooltip is misplaced
    • Some interactables have incorrect inputs
    • Overspeed Warning Test functions when Cold and Dark
    • Heat blur effect looks unnatural
    • Rain effect on the windshield acts unnaturallly while aircraft is moving
    • Aircraft disappears at certain distance
    • FMS Keyboard LOD
    • Landing gear wheels do not spin
    • Few LOD issues inside cockpit
    • Unable to start engines manually with Checklist Manual Completion
    • Before start checklist incorrect steps
    • Before start checklist battery step issue
    • Radios don’t tune to proper digits
    • XPDR input is doubled from PFD softkeys, and completely unresponsive on FMS
    • Takeoff and Landing Performance Tools INOP on EFB
    • Several dashboard interactables do not have sound effects
    • Player avatar is seated too deep into backrest
    • NAV frequency - MHz knob is not animated
    • Cessna 408 EFB Flightplan Not Transferring to G1000
    • Cold and dark start using checklist does not work
    • Cessna C408 Condition Levers Unbindable
    • Autopilot VS mode does not maintain select climb or descent rate
    • VR Controllers are not fully supported

Cessna Citation CJ4

  • Working Title fixed Cessna Citation CJ4 with version 2.1.1
    • Added electronic checklists
    • Reduced aircraft instability when skipping phases in missions
    • Fixed cabin pressure limits being exceeded at high altitudes
    • Fixed left engine anti ice sound missing
    • Fixed an issue where the active COM frequency was not appropriately set when spawning into a flight on the runway
    • Added NAV radio identification morse code when NAV volume is more than 0%
    • Added interaction box and preflight point to nose cargo doors
    • Fixed PITOT HEAT OFF and EMER LIGHTS OFF CAS message displaying when spawning in the air
    • Fixed FMC BRT/DIM switch not working correctly
    • Fixed right engine fire warning light cover not working
    • Fixed “all lights on” checklist bug by removing the section, as it was an incorrect checklist item to begin with
    • Fixed various buttons (all inoperative, reversion, engine deice, battery) and knobs (barometer pressure) missing sounds
    • Fixed preflight pitot cover interaction box
    • Fixed preflight check flaps and main gear interaction boxes
    • Fixed EFB nose baggage load position
    • Fixed covers not being removed when skipping mission steps
    • Fixed contrails appearing far larger than they should
    • Fixed mission passenger start points for boarding cinematic

Cessna Citation Longitude

  • Working Title fixed Cessna Citation Longitude with version 0.3.10
    • Added additional EFB checklists
    • Added an additional instrument camera preset (“Instrument 11”) that gives a view of all avionics screens except the copilot outboard GTC
    • Adjusted some instrument camera presets
    • The TOGGLE_ALL_AIRCRAFT_DOORS, TOGGLE_AIRCRAFT_EXIT_FAST, and TOGGLE_AIRCRAFT_EXIT key events now work properly for all doors
    • Fixed an issue where the baggage door would remain open after playing the passenger boarding cinematic in career missions
    • Fixed the display of CAS messages on the PFD
    • Fixed an issue where sometimes the parking brake lever could not be moved
    • Fixed an issue where the PTCU could sometimes provide hydraulic power to a system using the hydraulic pumps without an electrical power source or cross-system hydraulic pressure
    • Disabled the emergency exit

CGS Hawk Arrow II

  • BlueMesh fixed CGS Hawk Arrow II with version 1.1.2
    • Aircraft is too resistance to collision damage
    • Checklist Parking brake release Added before take off
    • Engine art → was not securely mounted
    • Vne Crash trigger lowered
    • Oil cools down too fast
    • Aircraft use only left tank
    • Switching off battery cut avionics
    • VR controllers

Cirrus Aircraft SR22

  • Working Title fixed Cirrus SR22 with version 2.0.11
    • Fixed auto shutdown feature
    • Fixed ELT switch animation being reversed
    • Added prop wash ground FX
    • Added additional items to exterior checklists and improved checklist level of detail
    • Fixed the Approach mode autopilot button tooltips
    • Added remaining exterior checklists
    • Fixed performance data calculations in the EFB

Cirrus Vision SF50 (Vision Jet)

  • Working Title fixed Cirrus Vision SF50 (Vision Jet) with version 0.5.11
    • The FMS/GPS navigation source is now displayed as “GPS” in the UI, and the associated lateral flight director mode is annunciated as “GPS” in the AFCS status box
    • Fixed mission passenger start points for boarding cinematic
    • Fixed an issue where landing field elevation for the cabin pressurization system was sometimes calculated incorrectly
    • Fixed an issue where the LANDING_LIGHTS_TOGGLE key event was not toggling the landing lights switch
    • The “FUEL PUMP ON” CAS message now appears as an advisory (white) when the engine RUN/STOP knob is selected to RUN and before the engine start sequence is initiated
    • The “FUEL PRESSURE LOW” CAS message no longer appears when the engine is not running
    • Enabled support for HDG SYNC mode
    • Interactions with the checklist scroll wheel using the mouse wheel are no longer reversed
    • The checklist scroll wheel now needs to be pushed and held for one second to toggle the checklist pane. Pushing and holding the wheel while the checklist pane is visible will now close the checklist pane and return to the previously selected pane
    • Fixed various cases of CAS messages incorrectly triggering a master caution or master warning
    • Set instrument lighting to 100% on cold and dark starts
    • Changed the data shown on the left side of the PFD bottom information panel to match the real airplane
    • Added missing localization for tooltips and checklist items
    • The “DOOR OPEN MAIN” and “DOOR OPEN BAGGAGE” CAS warning messages now appear in place of the “DOOR OPEN” advisory message when the engine is running and the aircraft is on the ground
    • Increased the brightness of the strobe (anti-collision) and navigation lights
    • Fixed the logic of the pulse (wig-wag) light feature so that pulse lighting is enabled when both the landing light switch and strobe light switch are selected ON and the airplane is above 500 ft AGL
    • Fixed an issue where the active COM frequency was not appropriately set when spawning into a flight on the runway
    • Chocks and covers are now visible by default when viewing the airplane in the hangar
    • Added IPS stall offset logic. When wing/stabilizer IPS is selected ON, the stall warning and protection system will now calculate higher stall speeds. Once wing/stabilizer IPS is turned off, stall speed calculations can be reset by using the “IPS Stall Offset Reset” button in the GTC Aircraft Systems page
    • Fixed the TOGGLE MASTER BATTERY keybinding
    • Fixed an issue where the SET AP CURRENT HDG key event could be used to manipulate the heading bug while Safe Return was active
    • Improved registration number styling to better match real-world liveries
    • Fixed an issue where the output tension of the starter generator and alternator could rise to improperly high values while the engine was spooling up rapidly
    • Adjusted the logic of the “TAKEOFF EMER BATT” CAS message to reduce the frequency of nuisance alerts
    • Reduce the weathervaning effect at high crosswinds during takeoff
    • Adjusted the logic of flap airspeed inhibits to prevent flap retraction in the air when airspeed is too low
    • The “FLAPS ICE” and “STALL SPEED HIGH” CAS messages can now be cleared using the “IPS Stall Offset Reset” button in the GTC Aircraft Systems page
    • Added appropriate CAS and EIS indications for when the flap system is inoperative
    • Adjusted the airspeed threshold at which throttle EPS engages to reduce the likelihood of inadvertent engagement when flying at or just above Vref in landing configuration
    • Increased flap extension time. Flaps now take roughly 10 seconds to move between each stage
    • Adjusted the positioning of the PFD CAS display so that it is not occluded by the Bearing Pointer 2 box when the PFD is in split mode
    • Fixed an issue where landing distance calculated by the EFB was too high in most cases
    • Gear touchdown sounds no longer play when the airplane lands without the gear extended

CubCrafters NX-Cub

  • iniBuilds fixed CubCrafters NX-Cub with version 0.0.8
    • Landing lights are inop
    • Nav and strobe lights are not bright enough
    • Checklist suggests contacting ATC for clearance before turning on the battery
    • Flaps do not suffer malfunctions when used at Vne
    • Parking Break cannot be deactivated with the VR Goggles Controller
    • Checklist suggests that aircraft has two engines
    • It is not possible to check the condition of brakes
    • The player starts with his back to the plane.
    • Parking brake are not set in taxi.flt
    • Navigation graph is incorrectly set (passenger outside the aircraft)
    • Trim at -100 (max up) after back on track (final.flt)
    • Elevator interaction volume badly placed, cannot interact when on the left side of the elevator

CubCrafters X-Cub

  • Improved dirts visual ( leaks, mud on tires )
  • Fixed an issue that caused the Dim/Bright switch of the XCub Floats variation to be inverted
  • Fixed an issue on the Floaters version of the XCub causing the landing gear indicator lights to behave incorrectly.
  • Fixed the position of the red and green navigation lights
  • Fixed wings strobe emissive mesh lights color
  • Fixed elevator collision not following animation
  • Improved cockpit rain tilling
  • Fixed missing left brake in wear and tear system
  • Fixed landing lights in pulse mode
  • Added a new cfg param tailwheel_algo_detection which can be used to let the sim use the new tailwheel detection algorithm already used in the mission constraints to affec the sim.
  • Applied to the XCub.
  • Added laser system under wing for floats variations
  • Fixed frost
  • Fixed cockpit holes
  • Fixed liveries issue on Flight Seeing 06, Aerial Ad Freelance, Rescue Freelance
  • Fixed the engine that stop at high altitude airport. Fixed the max rpm reached at full throttle for takeoff.
  • Disabled chocks for the ski variant

Curtiss JN-4 Jenny

  • iniBuilds fixed Curtiss JN-4 Jenny with version 0.0.15
    • Several interactable gauges are missing foley sounds within the cockpit
    • VR controls cannot interact with center flight stick while in VR mode
2 Likes