T16000M-Throttle and pedals influences each other

User Support Hub Hardware & Peripherals
1

Recently I have bought the Trustmaster T16000M flight pack. All the hardware seems to work correctly, pretty easy configurable but…

  1. Somtimes the throtttle reacts strange, it goes by itself to full throttle and when I slide it back and forward the power goes down and within a few seconds it raises to full power. When I pull out the Throttle it stops.
    2.Also sometimes the cockpit camera is turning (slowly) at start of a flight and I cannot stop that. Very hard to fly when camera is pointing to the back and you see nothing :thinking: :wink:
    I am not touching anything at that moment. Also stops when I pull out the Throttle.

Am I correct that it is not good to configure the slider on the joystick and the Throttle slider at the same time? Same thing for the cockpit camera? I have used the deault configuration for this set until now.

I will give it a try to track down the configuration so that only and only one control is used for a specific action.

Are there people who have configurations for this combination or some good tips?

Thanks a lot for thinking.

2

yep, avoid duplicate controls.

What I did is set the slider on the joystick to mixture control, and the big rotating knob on the left of the throttle to prop speed.

3

I have them - work fine - even with Saitek rudder pedals. First check in windows that the axes and buttons are all working OK. Then make sure nothing is duplicated - esp something like twisty stick and paddles on throttle.
(I use stick slider for pitch trim and throttle wheel for airbrakes/spoilers, and the small thumb stick for moving viewpoint about. My twisty axis has probs but there is no use for it - also no use for paddles (yet - ground steering maybe).

4

Thanks for clearify, helps me a lot.

5

Clear, thanks