The commands are called
“Autopilot VS Hold On”
“Select VSI Bug”
“Autopilot Flight Level Change On”
“Select Airspeed Bug”
“Autopilot Heading Hold On”
“Autopilot Nav1 Hold On”
“Select Altitude Bug”
Set Filter to all and type Autopilot in the Search by name box, they should show up
In about two months, you’ll be wanting a yoke, quadrant and pedals.
Good luck in finding some unsold. 
Thanks a lot!!!
I’m going to set them
I’m also using the Extreme 3D pro, and my issue has been with the throttle not going back to full zero idle. I also seem to have the issue where it jitters around erratically. Ive done calibrating so many times and even started a new profile in controls. Curious how you got it to work for you and could you share your sensitivity settings? Flying the airbus FBW A320 P.s does the same with the default A320. Cheers
I know what you mean. Same problem with throttle lever not going to zero and the jitters.
These settings on sensivities seem to work for me, Try it out. Hopefully solves your problem.
It does seem to bring it down to zero and eliminates the jitters… to some extent.
This seems to bring the LVR level to zero but still having problem on the second figure (the number below the LVR number…not sure if I am saying it right). That number does not go down below about 15% even with throttle lever all the way down.
On the props its fine as the second number is not there but it is there on the turbos or jets.
Not sure if made my self clear. Would love if anyone would explain to me what the “second” number is.
Sorry if this post appears twice. Reposted cos was not sure if first one went through. Apologies.
I know what you mean. Same problem with throttle lever not going to zero and the jitters.
These settings on sensivities seem to work for me, Try it out. Hopefully solves your problem.
It does seem to bring it down to zero and eliminates the jitters… to some extent.
This seems to bring the LVR level to zero but still having problem on the second figure (the number below the LVR number…not sure if I am saying it right). That number does not go down below about 15% even with throttle lever all the way down.
On the props its fine as the second number is not there but it is there on the turbos or jets.
Not sure if made my self clear. Would love if anyone would explain to me what the “second” number is.
Thanks VainerHawk73. unfortunately it didn’t change anything. I have a feeling its more then likely my logitech 3d pro. time to upgrade. appreciate your help 
I have the same side stick worked perfectly out of the box I went from using an xbox controller to an actual device used to fly a plane
Really makes the simulator a lot more immersive
This topic was automatically closed 30 days after the last reply. New replies are no longer allowed.
