To OP/TL;DR: I recommend that if you want a versatile setup for combat and civilian sims, go for a TWCS throttle which can be bought separately and should pair well with your current T16000M. If you want a more civilian-based peripheral setup, definitely consider the Thrustmaster Airbus Quadrant or a Honeycomb Alpha and Bravo setup. Avoid X56, I’ve reviewed it on my YouTube channel and it is not great value for what you get due to the QA issues.
Going to be honest, the Honeycomb Alpha and Bravo are great products and if you plan specifically on doing only civilian flight simulators, then those are the best options you could go with in terms of peripherals.
However, if you plan on not only doing civilian flight sims but you also want to get into combat sims like DCS World and IL-2 Sturmovik, I would much rather suggest a HOTAS setup like the T16000M FCS Hotas (though do note that the twist axis on that stick is a terrible potentiometer that is prone to break quite easily, might be better to just get rudder pedals to use with the T16000M) or a Gladiator NXT Joystick + TWCS Throttle which is still less than the cost of a Honeycomb Alpha and Bravo.
I mainly say this because I that in DCS World and IL-2 Sturmovik, I will be moving the stick around quite a lot and sometimes do really fast deflections so as to get the roll going faster or pulling back harder to get the edge, but I’m not 100% sure if the Honeycomb Alpha could withstand such high forces being applied when it was designed to be moved in a smooth and calm fashion in the world of civilian flight sims. The lack of buttons will also hinder you in something like DCS World where even a CM3 Throttle + VPC Constellation can be limited and require you to get a button box for the best full-on amount of buttons.
I currently use a Gladiator NXT + Virpil CM3 Throttle and currently awaiting MFG Crosswind pedals. Ultimately, I find this setup is perfect for me in Flight Simulator 2020 and all the combat sims I play like IL-2 and DCS. I do, however, have the flap axis on the CM3 and the Gladiator Throttle Axis which I use for propeller pitch and mixture respectively. However, it really does depend on the usecase. I just wouldn’t see myself or frankly anyone who would actively want to use a yoke in something like an F-18 or the A-10 but it could be an option, just might be a bit more limiting.