Not sure if it is fixed at 100%.
For fuel load, if you add 100% in the Ini tablet, it is correctly reflected in the EFB:
For Seats & Cargo, if you add 100% in the Ini tablet, it is not reflected at all in the EFB even if the added weight seems to affect the aircraft:
Looks like you can load pax, cargo and fuel on the Ini EFB, applay load and is reflected on the aircraft ECAM.
But the Asobo EFB is not automatically refreshing or updating.
Yeah, I can clearly see the weight changing as I load/unload through the aircraftâs efb, but MSFS EFB doesnât see it
In my test only the fuel was reflected in the Asobo EFB, not pax & cargo.
The GW on the ECAM didnât change after applying te load?
I have not checked the ECAM (I need to test). I am referring the % & aircraft diagram (pax+cargo) in the Asobo EFB that stay as empty:
It seems the total mass value at the bottom is correctly updated.
Oh yes. I saw the same, check my prior post.
It seems like the loading might be fixed. However, I think thereâs a new issue as my fuel usage was about twice as much as it should have been, and I ran out halfway through my flightâŠ
The weights are changing definitely, the aircraft is at least flyable now. Donât know about the default EFB though, I donât ever use it so I donât even know how thatâs supposed to look, but the total mass seems to be updating
The exact same thing just happened to me while flying the A332 GE.
Iâm going to try it with the A330 RR and the A320N.
I didnât fly them, but just by observing the fuel tanks I can see that both the inner and outer wing tanks are feeding the engines at the same time, which is not correct behavior. The outer tanks donât have feed pumps, they only transfer fuel into the inner tanks once the inner tanks reach certain levels. That might be why the consumption is doubled now. Unbelievable.
Iâve just loaded in with the A332GE on .25 beta with a cleared RC and nothing is letting me change the fuel from 50%. ZFW and CG are correct to simbrief load but fuel still stuck
Edit: no wait Iâve found it. You need the fuel truck to be attached for the EFB one to work on this aircraft. The one on the aircraft wonât do fuel though
Description of the issue: importing payload from the ini A321 EFB does not give the correct fuel. Also the centre tank keeps flashing between 0 and 3300kg
How often does this occur for you (Example: Just once, every time on sim load, intermittently)?: Every time
Please list clear steps you took in order to help our test team reproduce the same issue:
set a desired fuel load in the ini EFB
it âApply Loadâ
look at the fuel page
Look at the fuel on the EFB
Look at the fuel on the fuel page
Iâm not having this issue. It loads fine on my end.
Do you have the aircraft installed locally? This was a bug on an older version so it may be that your one needs updated if installed. But beware, the current streamed one uses 7000kg of fuel per hour instead of 2000kg. You can get around the issue you are having by applying fuel from the sim EFB
I forgot I had installed it locally a week ago, because the sim just didnât want to stream the textures for the cockpit labels for some reason. I did notice using the Asobo EFB to load fuel worked fine.
The ini one did work fine when I refueled midair because of the over usage.
Iâll test it streamed tomorrow if I remember.
Iâm having this issue again in latest beta build.
Same here +1
Hi folks,
Is there anybody else having this issue once again in the iniBuilds aircraft? If so would you be able to provide the version number you see via the FS Library is possible?
Thanks
The MSFS Team
Just loaded up the A330-200 30 minutes ago and it loaded everything fine.
