ISSUE DESCRIPTION
Description of the issue:
My Virgil R1 rudder shows a strange behavior since Update 3 (not before). If the brake pedals are released (0% input) the virtual brakes in the aircraft are fully pressed and the aircraft won’t move. Pressing the pedals slightly (5% or so) will make the virtual pedal jump to “released” and the aircraft starts moving. In the 5% - 100% range of the brake axis works as usual. After releasing the pedals the virtual pedal move back to “released” and an instant later jumps to “fully pushed” dispite the R1 pedals not being pushed at all.
- The brakeaxis curves (controls - setting - hardware) looks fine and the axis moving linear and smooth from bottom left to top right.
- Deleting all rudder profiles and re-doing only one did not solve the problem.
- parking brake is off
- no other bindings to the brakes or the brake axis
- persistent since update 3 with any aircraft and any mode (career, training, free flight)
FREQUENCY OF ISSUE
anytime with any aircraft
REPRODUCTION STEPS
Please list clear steps you took in order to help our test team reproduce the same issue:
YOUR SETTINGS
What peripherals are you using:
- Virgil R1 Rudder
- Honeycomb Alpha and Bravo
- all other non-essential usb-peripherials unplugged
MEDIA
Please add a screenshot or video of the issue occurring.