Nice!
10 characters, because we all need 10 characters, don’t we? Ok, we’ll here’s 10 characters. 
No luck for me. Did it work for you? I restarted the flight and MSFS - still no flight plan, even as a secondary flight plan.
Well, I didn’t check the flight plan, I was too focussed on the INIT. I already shut down my pc, I’ll check again tomorrow. Did you get the INIT?
Yes, I should have added that as point 7 on my post; I’ve had that as well. I’m not sure what it looks like to you, but what I have experienced is that the pushback truck connects to the aircraft (when called from the Fenix EFB), pushes the plane for a split-second and then immediately disconnects. I’m not aware of having any key-bindings that would cause that (not sure even what key it would be), though I will need to check that. Certainly not working as intended for me at the moment, though.
I guess I agree but overall weather radar while nice just isn’t a real issue for me. There is Zero threat of a weather related death in the sim, and I can see why it’s not been a priority for Asobo. Although I can also see why everyone wants it, it’s one of the features not present, where as if it were, only a handful would actually use it as intended and it would hardly come up.
Could be wrong but ¯_(ツ)_/¯
2 Likes
[quote="Byemoonmen, post:2596, topic:417613]
[quote="Karvala21, post:2574, topic:417613]
logged in to the Fenix app at the time with admin rights
[/quote]
I haven’t encountered any of the 6 bugs you mentioned but this caught my eye, have you tried running both MSFS and the Fenix WITHOUT admin rights? I’m not running either of them with admin rights and they are working fine, the Fenix software opens automatically when I load in the A320 in the sim.
[/quote]
Yes, it makes no difference either way unfortunately. I was initially running both without admin rights as well, but after encountering the various problems that was one of the steps I took to see if it would remedy it after reading enough posts talking about running it with admin rights.
[quote="Byemoonmen, post:2596, topic:417613]
[quote="Karvala21, post:2574, topic:417613]
a memory leak seems to occur which causes the memory requirements of the main MSFS
[/quote]
Have you cleaned your community folder? Removed toolbar pushback?
[/quote]
Yes, I’ve run it with just the Fenix A320 in the Community folder and I still witness it. It’s definitely a memory leak looking at its behaviour, though it’s hard to know what is causing it as it never occurs on the first flight in the A320 after starting up MSFS, but very often will have occurred on the second or third. I don’t use the pushback toolbar anyway incidentally; too many reported problematic interactions.
[quote="Byemoonmen, post:2596, topic:417613]
I will remind myself to fly to Gatwick to see if I have any issues landing there, but all my autolands have worked so far.
[/quote]
Yes, I’d be very curious to see if you experience it. I will try to replicate it myself later; it was on a flight from Southampton with an RNAV08R approach via ABIBI if that helps. I’ve also had autolands elsewhere without any problems, which is why I was very surprised when it happened. It wasn’t even just a rudder problem, it was an aileron bank. Looks somewhat like a GPS error, i.e. it had flown past the point it was aiming for and began to turn back. Gatwich uses the same ILS frequency for the approaches in both directions IIRC, so I wonder if it’s something to do with that (i.e. syncing to the wrong beacon)?
You could try resetting the FMGC - it’s one of the options in the settings I think - sorry, don’t have the sim running just now. I loaded a simbrief plan and wanted to load a different one, but the INIT REQUEST option had gone, but restting the FMGC brought it back - might help here.
There is a Knowledgebase artical about this error. Hope this helps:
https://kb.fenixsim.com/invalid-f-pln-uplink-message-when-importing-from-simbrief
1 Like
Where did you find this?
Speaking about performance and cabin hit, hope it could be a good starting point for a discussion.
I have my navigraph charts in my tab. No navigraph toolbar, no CTD.
Here it is @RobedBadge93725
Flew it really quick here, EGHI - EGKK, RNAV 08R Autoland, all working as intended. On the second picture you can even see the “FLARE” notice on the PFD. Check the chart again and make sure you selected the correct ILS freq (IGG/110.9)
The F/O forgot the landing lights, but the landing was really smooth
3 Likes
There’s zero threat from anything in the sim, delays, failures etc etc that’s why this is a simulator it’s a simulation. It’s a flight simulator simulating real world flying and operations… as best it can… weather radars should’ve been included from release. The simulator part is in the name. The sim is sure getting better and better.
Never had that problem.
Never had that problem.
Not had this problem either.
Nope, not had this issue either.
Nope, never experienced this either.
Never had this issue either. It sounds to me like you don’t know how to properly setup this aircraft.
6 Likes
another one that must have the fenix 12.8 version or something like that hahahaha my mother accept it at once! FENIX IS AN AMAZING PLANE, but it has a lot of bugs and errors now, it needs a few months
1 Like
Yes, the ILS frequency was right. How do I know? (1) Because I checked it and entered it myself; and (2) Because it flew the glideslope right down to 50 feet above the runway. How could it possibly have done that if I hadn’t entered the correct frequency? It’s just done it again at Doncaster a moment ago, and again it flew the glideslope correctly doen to 50 feet, again I checked the ILS entry (I was landing on runway 02; my RAD entry said IFIN 110.95; do you agree this is correct?) and again banked sharply to the right at the end. Something’s not right.
Sounds to me like you don’t have anything useful to say. Just because you’ve not experienced something doesn’t make it not true and just insulting other people doesn’t make you any more right.
3 Likes
Given you are getting outright failures and things just not working (rather than things not working correclty), it seems likely that there is something amiss in your setup or installation of the Fenix. Could be a conflicting mod, but maybe “just” a corrupted install or something.
I assume you’ve uninstalled the Fenix and re-installed it?
3 Likes
To be honest, no; that’s the one thing I haven’t done yet. I’ve uninstalled everything else so there aren’t any conflicts and I’m running the latest version of the Fenix, but I guess reinstalling is the next step.
1 Like